73 (E)CONTENTSSDTI interfaceDigital data input/output operations using the SDTIformat (compressed digital interface) are enabled byinstalling the AJ-YAC930G SDTI board (optionalaccessory) in this unit.SDTI (Serial Data Transport Interface) complies withthe SMPTE 305M standard.The data stream format transferred via the SDTIcomplies with the SMPTE 321M standard.Precautions to observe when using theSDTI signalsO The unit can record only if the SDTI input signalsare 1a transfer signals in the DVCPRO format.However, when playback signals other than normal1a playback signals have been input, there is noguaranty for the pictures and sound recorded or forpictures and sound with EE.O Editing operations can be performed only when allthe video and audio signals as well as the timecodes in the SDTI input signals are regular databased on the DVCPRO format.O CUE signals are not transferred by the SDTIinterface.O SDTI dubbing is not possible from tapes recordedusing the DV or DVCAM format.Use SDI when dubbing tapes recorded in the DV orDVCAM format.O When playing back a DV or DVCAM format tape,DV compressed signals (Compliant with IEC61834-2.) serve as the SDTI output.O The video and audio signals in the SDTI outputsignals cannot be adjusted.O During SLOW/STILL playback, the unprocessedvideo and audio signals are output as the SDTIoutput.When these video and audio signals are to bemonitored using another device, they may differfrom the video and audio signals played back bythis unit.PUSH PUSH PUSHAC INSIGNALGNDAES/EBU ANALOGCH1/2INYVIDEOVIDEOOUTSERVICE ONLYREMOTE IN/OUT CH1 CH2AUDIOINENCODER REMOTERS-232CPARALLELREMOTE OUTINREF VIDEOINONOFFPBPRY 12(WFM)3(SUPER)PBPRCH1/2OUTREMOTE75ΩONOFF75ΩANALOGTCINTCOUTMONLMONRCH1 CH2AUDIOOUTOPTION 2OPTION 1SDTIIN OUT12SDIIN OUTACTIVETHROUGH123(SUPER)PUSH PUSH PUSHAC INSIGNALGNDAES/EBU ANALOGCH1/2INYVIDEOVIDEOOUTSERVICE ONLYREMOTE IN/OUT CH1 CH2AUDIOINENCODER REMOTERS-232CPARALLELREMOTE OUTINREF VIDEOINONOFFPBPRY 12(WFM)3(SUPER)PBPRCH1/2OUTREMOTE75ΩONOFF75ΩANALOGTCINTCOUTMONLMONRCH1 CH2AUDIOOUTOPTION 2OPTION 1SDTIIN OUT12SDIIN OUTACTIVETHROUGH123(SUPER)Reference signalgeneratorSourceRecorderConnections involving two unitsSDTI signals
