1028-2-5 OUTPUT SELThe ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksVOICE MEMORESERVONOFFSet the available memory space for voicememos in P2 cards.ON: Reserve a voice memo area of 10minutes or longer separately from thevideo recording capacity. The voicememo area can be used even whenFULL is displayed for the recordingcapacity of the P2 card.OFF: Do not reserve any voice memospace.Even when this item is set to OFF, and FULLis displayed for the P2 card’s recordingcapacity, it may be possible to record voicememos depending on the status of the P2card.– C U F –REC START ALLNORMALSelect operating modes that allow recordingto start.ALL: Allow recording to start during stop,recording pause, and playback.NORMAL:Allow recording to start during stop andrecording pause.When the INTERVAL REC MODE is set toeither “ON” or “ONE SHOT”, the “ALL”setting for this option switches to “NORMAL”operation.– C U F –P.ON RECSLOT SELHOLDSLOT1Select the recording order of the slot whenthe power is turned on.HOLD:The recording order starts with the cardpreviously selected when the power wasturned off.SLOT1:The recording order starts with the cardthat is inserted in Slot 1 when the poweris turned on.– C U F –Items/Data SavedAdjustableRange RemarksVIDEO OUTSELVBSVFYSDISelect the output signal on the VIDEO OUTterminal.VBS:Output a regular composite signal.VF: Output a VF Y signal. The statusdisplay is also superimposed.Y: Output a component Y signal.SDI: Output an SDI signal. Only selectablewhen the optional AJ-YA902AGextension board is attached.– C U F –OUTPUT CHAR TCSTATUSMENUONLYSet the character contents superimposedonto the output signals for the VIDEO OUTterminal (Analog or SDI) and MON OUTterminal.TC: Display the time code. (Displays themenu when menu characters aresuperimposed.)The TC display position moves up and downdepending on the camera ID position.STATUS:Display the same characterssuperimposed on the VF signal. (Displaysthe menu when menu characters aresuperimposed.)MENU ONLY:Displays only when the menu charactersare superimposed. No display appearswhen other characters are superimposed.– C U F –MONITOR OUTCHARONOFFSelect whether or not to superimposecharacters on the MON OUT terminal signalindependently of the camera’s VIDEO OUTCHARACTER switch. (The charactercontent is the same as the video outputsignal.)ON: Enable superimpose.OFF: Disable superimpose.– C U F –LCD MONCHARONOFFSelect whether or not to superimposecharacters on the LCD monitor. (Thecharacter content is the same as the videooutput signal.)ON: Enable superimpose.(Not interlocked with the VIDEO OUTCHARACTER switch.)OFF: Disable superimpose.(Not interlocked with the VIDEO OUTCHARACTER switch.)– C U F –VF MODE EE/PBEESelect the image to display in the viewfinder.EE/PB : Display the playback image in theplayback mode.EE: Always display the camera image.– C U F –THUMBNAILOUTONOFFSelect whether or not to output clipthumbnails displayed on the LCD monitor tothe video output and monitor output signals.ON: Enable output.OFF: Disable output.– C U F –ᤨࠫ
