Panasonic AJ-SPX900e Operating Instructions Manual

Also see for AJ-SPX900E: Mechanical Parts List Operating instructions Operating instructions

Contents

Panasonic AJ-SPX900e Operating Instructions Manual Manual pdf 119 page image

11988-6-4 MIC/AUDIO18-6-5 MIC/AUDIO2The ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksFRONT VR CH1 FRONTW.L.REARALLOFFSelect whether or not to enable the FRONTAUDIO LEVEL control for the signal selectedas the input signal to AUDIO CH1.FRONT: Only enabled when FRONT isselected.W.L.: Only enabled when WIRELESS isselected.REAR:Only enabled when REAR isselected.ALL: Enabled for any input selected.OFF: Disabled for any input selected.Recording level does not change byturning the volume control.– C U F –FRONT VR CH2 FRONTW.L.REARALLOFFSelect whether or not to enable the FRONTAUDIO LEVEL control for the signal selectedas an input signal to AUDIO CH2.FRONT: Only enabled when FRONT isselected.W.L.: Only enabled when WIRELESS isselected.REAR:Only enabled when REAR isselected.ALL: Enabled for any input selected.OFF: Disabled for any input selected.Recording level does not change byturning the volume control.– C U F –MIC LOWCUTCH1FRONTREARW.L.OFFSelect the microphone low-cut filter.– C U F –MIC LOWCUTCH2FRONTREARW.L.OFFSelect the microphone low-cut filter.– C U F –MIC LOWCUTCH3FRONTREARW.L.OFFSelect the microphone low-cut filter.– C U F –MIC LOWCUTCH4FRONTREARW.L.OFFSelect the microphone low-cut filter.– C U F –LIMITER CH1 ONOFFSelect the limiter.– C U F –LIMITER CH2 ONOFFSelect the limiter.– C U F –AUTO LEVELCH3ONOFFSelect the level setting method.– C U F –AUTO LEVELCH4ONOFFSelect the level setting method.– C U F –RECCH3/CH4SWCH1/2Select the signals to be recorded in CH3and CH4.SW: According to camera’s CH3 and CH4selector switches.CH1/2 : Record same signals as CH1 andCH2.– C U F –25M REC CHSEL2CH4CHSelect the audio channels to be recorded inthe DVCPRO and DV formats.2CH: Only recorded in CH1 and CH2.4CH: Recorded in all channels from CH1 toCH4.– C U F –Items/Data SavedAdjustableRange RemarksTEST TONE NORMALALWAYSOFFCHSELSelect the test signal.NORMAL : Output test tones to CH1/2 whenthe OUTPUT/AUTO KNEEselector switch is set to BARS andthe AUDIO IN switch CH1 is set toFRONT.ALWAYS : Output test tones to CH1/2 whenOUTPUT/AUTO KNEE selectorswitch is set to BARS.OFF: Disable test tone output.CHSEL : Output test tone to the channelswhere the AUDIO IN switch CH1or CH2 is set to FRONT whenOUTPUT/AUTO KNEE selectorswitch is set to BARS. The testtone is not output to CH3 andCH4.– C U F –Items/Data SavedAdjustableRange RemarksFRONT MICPOWERONOFFSelect the phantom power supply for thefront microphone.– C U F –REAR MICPOWERONOFFSelect the phantom power supply for therear microphone.– C U F –AUDIO OUT ONOFFSet the audio output circuit.OFF: Power-down output circuit to disableoutput.ON: Enable output.– C U F –MONITORSELECTSTEREOMIXSelect the signal format for the monitoroutput.– C U F –FRONT MICLEVEL–40dB–50dBSelect the front microphone input level.– C U F –REAR MIC CH1LVL–50dB–60dBSelect the rear microphone input level.– C U F –REAR MIC CH2LVL–50dB–60dBSelect the rear microphone input level.– C U F –REAR LINE INLVL0dB+4dBSelect the rear line input level.– C U F –AUDIO OUT LVL 0dB+4dBSelect the audio output level.– C U F –HEADROOM 18dB20dBSet the headroom (standard level).– C U F –WIRELESSWARNONOFFSelect whether or not to enable the alarm totrigger for poor wireless receiver reception.– C U F –ᤨࠫ