Panasonic AK-UCU600P Operating Instructions Manual

Contents

Panasonic AK-UCU600P Operating Instructions Manual Manual pdf 31 page image

Picture monitor (PM)- 31 -Status displaysFrom the IRIS display screen, press the [CHARA] button of the ROP to display the “status display screen”.However, when the “IRIS LEVEL” setting is “OFF”, the screen will be displayed first if the [CHARA] button of the ROP is pressed when theinformation is not displayed on the picture monitor.When the “status display screen” appears, pressing the [CHARA] button of the ROP again displays the status screen.Pressing the [CHARA] button repeatedly switches display through the status screens in the sequence 1/7 → 2/7 → 3/7 → 4/7 → 5/7 → 6/7→ 7/7 → 1/7 ….Status display screenC1 1080/59.94p-240psfUHD_HDR SCENE1 1500BT.2020 Z00EX DZx2 F00EX x2F.DROPOPT_CAM:■■■■■ND:***** OPT_CCU:■■■■■CC:***** 15000K CLOSEA B CKL M NOOOOJIDEFGHA. Camera numberB. System formatC. Scene file numberNot displayed when SCENE FILE is set to OFF.D. Shutter valueE. CCU format informationF. COLORIMETRY (Y/C conversion coefficient) informationG. Extender informationH. Lens informationI. Zoom positionJ. Focus positionK. Optical signal reception status (camera and CCU)L. ND/CC filter valueM. Color temperatureN. IRIS F valueO. TALLY INFO● Set each item to be displayed on the [PM VIEW SETTING] screen that can be accessed by selecting [MAINTENANCE] on theCCU menu.● The camera format indicates the format of the signal output from the camera.● Pressing the [CHARA] button of the ROP from the status display screen displays the “status screen”.● TALLY INFO (L)• Display the R tally in two segments of the upper row and the R, G, or YL tally in two segments of the lower row.• When all R, G, and YL tally signals are ON, the upper row is red, and the left and right segments of the lower row aregreen and yellow, respectively.• When the R and G tally signals are ON, the upper row is red and the lower row is green.