Panasonic AK-UCU600P Operating Instructions Manual

Contents

Panasonic AK-UCU600P Operating Instructions Manual Manual pdf 77 page image

CCU menu- 77 -START UPThis is the selection screen for the START UP menu.START UPCAM POWER ONVF POWER ON___ indicates factory default settings.Item Setting value Setting detailsCAM POWER OFFONREMOTESet the control of the camera's power that is to be performed when the unit's power is turned on.OFFThe camera's power will not come on even when the unit's power is turned on. In this case,"HEAD POWER" on the operation panel of the ROP or [CAMERA POWER] on the unit must beset to ON.ONThe camera's power will come on when the unit's power is turned on.REMOTETurns on in the same state as when the CCU power was turned OFF.VF POWER OFFONREMOTESet the control of the viewfinder's power that is performed when the unit's power is turned on.OFFThe viewfinder's power will not come on even when the unit's power is turned on. In this case,"VF POWER" must be set to ON on the operation panel of the ROP.ONTurning on the power of this unit also turns on the power of the viewfinder.REMOTETurns on in the same state as when the CCU power was turned OFF.SETUPThis is the selection screen for the SETUP menu.SETUPIRIS SCALE FULLCABLE CONNECTION HYBRIDUSER BUTTON1 CHARAUSER BUTTON2 MENU/USER1 LOCKROP SW REAR ONLYTALLY MAKEPANEL LED BRIGHT 37SEG BRIGHT 8LAN TRUNK 1Gbps___ indicates factory default settings.Item Setting value Setting detailsIRIS SCALE FULL2STOPSet the IRIS display range of the status display screen.CABLECONNECTIONHYBRIDFIBERSets the cable used to connect the camera.HYBRIDSelect this when connecting the camera using an optical fiber multi cable.FIBERSelect this when connecting the camera using only optical fiber.When [FIBER] is selected, power will not be supplied to the camera. In addition, the "OPEN" and"SHORT" errors will not be displayed.