Panasonic AK-UCU600P Operating Instructions Manual

Contents

Panasonic AK-UCU600P Operating Instructions Manual Manual pdf 60 page image

CCU menu- 60 -SETTING(1/2)This is the selection screen for the SETTING(1/2) menu.SETTING(1/2)COMPOSITE/PM PMANALOG PROMPT 1-OUTRETURN FS OFFTRUNK1 RS422TRUNK2 RS422MONO SW OFFHD BAR SELECT SMPTEBAR LPF 9TAPBAR USER1 100%WHITEBAR USER2 0%BLACK___ indicates factory default settings.Item Setting value Setting detailsCOMPOSITE/PM PMNORMALSet the signal to be output from [VBS PM OUT] connector.● PM :Output the picture monitor images.● NORMAL :Output the main line images.● When [SDI OUT8] is set to [NORMAL] in the [OUTPUT FORMAT] menu, this will be fixed at [PM]to maintain the [SDI OUT8] or [COMPOSITE/PM] output picture monitor display.ANALOGPROMPT1-OUT2-INSet input/output for the [ANALOG PROMPT1 IN] and [ANALOG PROMPT2 IN/OUT] connectors.● When [1-OUT] is selected, the signal input to the [ANALOG PROMPT1 IN] connector becomesthe loop-through output. Apply termination on the connected device.RETURN FS ONOFFSet the delay mode for the HD return signals.TRUNK1 RS422RS232CSet the TRUNK1 line send/receive format of the [TRUNK] connector.TRUNK2 Set the TRUNK2 line send/receive format of the [TRUNK] connector.MONO SW ONOFFSet CCU output video to monochrome.HD BAR SELECT STDSMPTEARIBEIAJSPLITSet the color bar signal for output with the HD signal.HD BAR LPF OFF3TAP5TAP7TAP9TAPSet the filter to be applied to the color bar signal output with the HD signal.HD BAR USER1 75%WHITE100%WHITE+I_SIGNAL-I_SIGNALSet user selection 1 for when [ARIB] has been selected as the [HD BAR SELECT] setting.HD BAR USER2 0%BLACK+Q_SIGNALSet user selection 2 for when [ARIB] has been selected as the [HD BAR SELECT] setting.