622) Select [YES] on the confirmation screento attach an index.• The point in the clip at which the indexwill actually be attached will be accurateto within an error of 0.5 seconds.• To delete the index, select[INDEX][YES] in step 3 beforeperforming the following.1) Select the clip to play, tilt theOPERATION lever in the < >direction, and pause the clip.2) Since tilting the OPERATION leverin the < >< > directions moves thepointer between the points whereindexes are attached, move thepointer to the index to be deleted, andpush the OPERATION lever.3) Select [YES] on the confirmationscreen.[NO]:Returns to the previous screen.• It is not possible to add indexes to clips shotusing a consumer camcorder model.• It is not possible to adjust the volume duringindex playback.[CLIP PROTECT] (only in AVCHD mode):[YES]:Protects selected clips. ([ ] mark will bedisplayed.)• Cancels protection when the protectedclip is selected. ([ ] mark willdisappear.)Formatting the memory card will delete allclips even if they are protected.[NO]:Returns to the previous screen.4 Press the thumbnail screen.Repairing clips (only in DV mode)Repair clips on which the defective clip indicator[ X ] (Yellow) is displayed on the thumbnail screen.• Clips with the defective clip indicator [ X ] (Red)cannot be repaired.1 Press the screen.The thumbnail menu will be displayed.2 Select [REPAIR] in the [OPERATION] item onthe thumbnail menu and press [YES].3 Select a clip to repair using the OPERATIONlever.4 Press the button.5 Select [YES] on the confirmation screen,and push the OPERATION lever.Clip repair will be performed.• When shot mark has been set on the clip, thesetting is canceled.• Repair defective clips with this camera beforemoving them to a computer. Defective clipscannot be repaired once they are moved toa computer and written back on the memorycard.
