Panasonic AVCCAM AG-AC160P Operating Instructions Manual

Also see for AVCCAM AG-AC160P: Operating instructions Brochure & specs Operating instructions Operating instructions

Contents

Panasonic AVCCAM AG-AC160P Operating Instructions Manual Manual pdf 91 page image

91 Menu[TC/UB SETUP] screenItem Displaymode Description of settings[TC MODE] Selects the correction mode of the internal time code when the time code of theinternal time code generator is recorded.[DF]: Uses the drop frame mode.[NDF]: Uses the non-drop frame mode.• Automatically set to [NDF] when you set the recording frame rate of therecording format to 24P.• Enabled only when [SYSTEM FREQ] = [59.94Hz].[TCG] Sets the mode in which you advance the internal time code generator.[FREE RUN]: The time code is advanced regardless of the operation mode. Aslight time error may occur when switching to mode if theframe rate is set to 24P.[REC RUN]: The time code is advanced when shooting.[TC PRESET] Sets the initial time code.When you set the frame rate of the recording format to 24P, set the frame valueto 0 or a multiple of 4 in AVCHD mode and to 5 frame units in DV mode. If anyother value is set, the recorded time code will mismatch.[YES] [NO][UB MODE] (DV modeonly)Sets the content to be recorded as the user information.[USER]: Records the user information.[TIME]: The time is recorded.[DATE]: The date and time are recorded.[TCG]: Records the value of the time code generator.[FRAME RATE]: Records the frame rate information of frame conversion.[UB PRESET] Sets the user information.[YES] [NO][EXT TC LINK] Synchronizes the initial time code value during multi-camera shooting. ([SLAVE]camera time codes are synchronized to the [MASTER] internal [TCG] value.)[MASTER]: Sets the mode to master mode.[SLAVE]: Sets the mode to slave mode. When the button is pressed, input time codes are synchronized to theinternal [TCG].[NO]: Returns to the previous screen.• [MASTER] and [SLAVE] mode settings are in effect only when this menu isopen. When the menu is closed, [EXT TC LINK] is automatically canceled.is the factory default mode.