Panasonic AVCCAM AG-AC160P Operating Instructions Manual

Also see for AVCCAM AG-AC160P: Operating instructions Brochure & specs Operating instructions Operating instructions

Contents

Panasonic AVCCAM AG-AC160P Operating Instructions Manual Manual pdf 72 page image

72Nonlinear editingNonlinear editing of video data on memory cardscan be performed by connecting the camera via theUSB2.0 connection cable to a computer for editing(Page 68).Use a sufficiently charged battery or the ACadaptor.The following conditions are necessary for USBconnection.• PC with Windows XP, Windows Vista, orWindows 7, or Macintosh with Intel CPU (IntelMac)• USB2.0 (High Speed, Mass Storage Class)compatibility (not compatible with USB1.1)• Only connect to one computer at a time.• Camera cannot be operated if a hub or otherdevice is connected between the camera andcomputer.1 Insert a memory card into the camera, andturn the POWER/MODE switch of the camera. (Page 30 of Vol.1)2 Connect the camera to a computer with aUSB2.0 connection cable.Turn on the power of the computer beforeconnecting.3 Select [PC].Dubbing can be performed to a Blu-ray DiscRecorder, etc. by selecting [RECORDER].4 Perform nonlinear editing on the computer.The contents of the memory card will appear asa removable disk icon within My Computer orthe desktop on the computer screen. (Page 73)(Example) WindowsRemovable disk (E:)(Example) MacintoshNO NAME• When copying files from the camera to acomputer, take care to ensure that files arenot accidentally overwritten.• For more details, refer to the operatinginstructions of your computer editing software.• When changing memory cards, always ensurethat the access lamp is not flashing andthat the memory card is not currently beingaccessed.• Camera functions cannot be used when thecamera is connected to a computer.• Always perform “safe hardware removal”when disconnecting the cable.• The data on the memory card cannot beaccessed when the memory card slot cover isopen.• If you use the battery and connecting a USBcable, no output will be performed from, , and

terminals. When USB cable is connected,a message appears and then disappearson the LCD monitor and viewfinder, whichis displayed again when operating theOPERATION lever. (This does not occur whenconnecting an AC adaptor.)5 Turn off the power of the camera.• If the camera cannot be correctly recognizedby the computer, you may be able to remedythat by one of the following methods.- Turn the power of the camera and thecomputer off and back on again.- Remove the memory card from the cameraand reinsert it.- Connect to a different USB2.0 terminal onthe computer.• If you are using an SDXC memory card, somecomputers may not recognize the data. Makesure your computer supports SDXC cards.