83 Menu DisplaysSetup menu list[SCENE FILE] screenItem Displaymode Description of settings[LOAD/SAVE/INIT] [LOAD]: Loads the scene file settings saved in this camera.[SAVE]: Saves the updated scene file settings.[INIT]: Returns the scene file settings selected using the dial, to the factory settings.[NO]: Returns to the previous screen.[VFR MODE] (AVCHDmode only)[ON]: Enables the VFR (Variable Frame Rate) mode.[OFF]: Disables the VFR mode.Operates only when [REC FORMAT] is [PH 1080/24P], [PH 1080/30P], or [PH1080/25P].When [SDI 24PsF] = [ON], VFR operation is disabled.When [VFR MODE] = [ON], you cannot record audio.When VFR mode is set to [ON], INTERVAL REC, relay recording, and SIMULREC settings will all be cancelled. This mode cannot be used with INTERVALREC, relay recording, SIMUL REC, and pre-rec functions.[FRAME RATE] (AVCHDmode only)Sets [FRAME RATE].Operates when [VFR MODE] is [ON].You can set using on the left side of the camera body.When [SYSTEM FREQ] = [59.94Hz]When [REC FORMAT] = [PH 1080/24P] [PH 1080/30P]:[2]/[6]/[9]/[12]/[15]/[18]/[20]/[21]/[22]/[24]/[25]/[26]/[27]/[28]/[30]/[32]/[34]/[36]/[40]/[44]/[48]/[54]/[60]When [SYSTEM FREQ] = [50Hz]When [REC FORMAT] = [PH 1080/25P][2]/[6]/[9]/[12]/[15]/[18]/[20]/[21]/[22]/[23]/[24]/[25]/[26]/[27]/[28]/[30]/[32]/[34]/[37]/[42]/[45]/[48]/[50][SYNC SCANTYPE] Selects the synchro scan display setting.[deg.]: Sets to angle display.[sec]: Sets to speed display.[SYNCHROSCAN] Adjusts the synchro scan shutter speed used for shooting images on a TVscreen, etc.Holding the OPERATION lever tilted upward or downward will cause the valuesto change at a faster rate.When [SYSTEM FREQ] = [59.94Hz]• When [SYNC SCAN TYPE] = [sec]60i/60 P mode: [1/60.0] - [1/249.8] secs30 P mode: [1/30.0] - [1/48.0] - [1/249.8] secs24 P mode: [1/24.0] - [1/48.0] - [1/249.8] secs• When [SYNC SCAN TYPE] = [deg.][3.0 d] - [180.0 d] - [360.0 d] (0.5 d increments, angle display)When [SYSTEM FREQ] = [50Hz]• When [SYNC SCAN TYPE] = [sec]50i/50 P mode: [1/50.0] - [1/250.0] secs25 P mode: [1/25.0] - [1/50.0] - [1/250.0] secs• When [SYNC SCAN TYPE] = [deg.][3.0 d] - [180.0 d] - [360.0 d] (0.5 d increments, angle display)is the factory default mode for the dial .Menu
