Panasonic AW-PH650N Operating Instructions Manual

Panasonic AW-PH650N Operating Instructions Manual Manual pdf 6 page image

6Mounting (Pan/tilt head)Precautions for installation Do not install this unit by suspending it, and do not installit on its side. Using the four pan/tilt head mounting holes, fasten theunit securely with bolts which are long enough.The mounting holes have a diameter of 3/8” (10 mm). Usesufficiently long bolts with an 5/16” (8 mm) diameter. Donot use bolts with a diameter smaller than 5/16” (8 mm).Use hexagon head bolts or hexagon socket head bolts,for instance, which can be tightened up securely using atool and which are made of a material and with a finishthat will withstand outdoor use. Be absolutely sure to use parts such as flat washers orspring washers together with the bolts to prevent the boltsfrom coming loose.How to install Attach one end of the anti-fall wire to the mounting hole,and secure the other end to the mounting base or othersturdy place.The diameter of the hole where the anti-fall wire isattached is 6.5 mm. Attach the wire using the anti-fall wiremounting bolts with a 6 mm diameter and a length of 16mm, flat washers, spring washers and nuts.Ensure that the anti-fall wire is strong enough to bear theweight of the entire pan/tilt head (head, housing, cameraand cable).The diameter of the four pan/tilthead mounting holes are 3/8 (10).6-5/16 (160)7-1/2 (190)5-1/2 (140)6-11/16 (170)Mounting areaMounting baseMounting boltsAnti-fall wire bolt Anti-fall wireUnit: inch (mm)9/16(15) 9/16(15)9/16(15)9/16(15)