Panasonic AW-RP60G Operating Instructions Manual

Also see for AW-RP60G: Manual updating changes Operating instructions Operating guide

Contents

Panasonic AW-RP60G Operating Instructions Manual Manual pdf 10 page image

10Parts and their functionsControl panelPOWERMENUSTORE DELETEPRESETAWBAUTOIRISZOOMFOCUS AUTO PTZ SPEEDLOW HICAMERA SELECTIONPRESET MEMORY SELECTIONOTAFWIDETELEABBF11 2 3 4 51 2 3 4 56 7 8 9 10F2 F3 F4SELECT ON/OFFCAMERA OSDEXITF5USER 1 USER 2USER 3ENABLE SHIFTPANTILTUSER 4BARSALARM  Menu operationsectionUser button sectionColor adjustmentsectionFocus, zoom and irissectionCamera selection sectionPan and tilt sectionPreset memoryselection section1 POWER indicator [POWER]This turns on when the POWER switch () on the rear panel is set toON while power is supplied.2 ALARM indicator [ALARM]This turns on when an alarm has been received from the selectedremote camera.3 LCD panelDisplays the status screen or menu.4 MENU button [MENU]When you press the MENU button, the menu will be displayed on theLCD panel.This is lit while the menu is displayed.Menu operation sectionF1 F2 F3 F4SELECT ON/OFFCAMERA OSDEXITF5 5 CAMERA OSD SELECT dial [CAMERA OSD SELECT]When the CAMERA OSD ON/OFF button is lit, turn the dial to find themenu and then press it to select.6 F5 dial [F5] (menu operation dial)When a menu screen is displayed on the LCD panel, turn the dial tofind the menu and then press it to select.7 F1 dial [F1], F2 dial [F2], F3 dial [F3], F4 dial [F4] (menuoperation dials)Use these dials to manipulate the setting values displayed on theLCD panel of the unit.Turn F1 to F4 dials to select setting values, etc.When the status screen is displayed, use them to manipulate the itemvalues displayed in the lower part of the LCD panel.When a menu screen is displayed, use them to manipulate theselected menu item values.8 CAMERA OSD ON/OFF button[CAMERA OSD ON/OFF]Use this to switch the CAMERA OSD ON or OFF.9 EXIT button [EXIT]When you press the EXIT button while a menu screen is displayed onthe LCD panel, the screen will return to the previous menu.When the status screen is displayed, if you press the EXIT buttonwhile manipulating the items that are allocated to the F1 through F4dials, the operation of the dial will be canceled.