Panasonic AW-RP60G Operating Instructions Manual

Also see for AW-RP60G: Manual updating changes Operating instructions Operating guide

Contents

Panasonic AW-RP60G Operating Instructions Manual Manual pdf 19 page image

19How to turn on and off the power of the remote camerasHow to turn on the power of the remotecamerasThe power of the remote cameras in the standby state can be turned onfrom the unit.There are the following methods of turning on the power.zz Turning on the power one camera at a timezz Turning on the power of the cameras simultaneously with the turningon of the unit’s powerzz Turning on the power of multiple cameras¯Turning on the power of all the cameras¯Turning on the power of the selected camera groupEach of these methods is described in turn below.Turning on the power one camera at a time1. Select the remote camera.By holding down the applicable camera selection button [CAMERASELECTION] for about 3 seconds, the name of the remote cameraand the [ON (F2)] and [OFF (F3)] buttons are displayed on the LCDpanel.zz This operation is available when the status screen is beingdisplayed.Note2. With the camera selection button held down, press theF2 dial.CAM1POWER:ONON(F2) OFF(F3)Turning on the power of the cameras simultaneouslywith the turning on of the unit’s power1. Press the [MENU] button.2. Select the [CAMERA] SYSTEM menu to display the[AUTO POWER] item.CAMERACAMPOWERNON ON ーCAMLOCKAUTOPOWERAW-UE703. Turn the F2 dial to select [ON] and press the F2 dial.The power of remote cameras whose setting in the [CAM1] to[CAM200] item in the [CONNECT SETTING] SYSTEM menu is setto either [Serial] or [LAN] turns on when the unit's power is turnedon.zz Depending on the number of cameras connected, it may takesome time before you can operate the unit.NoteTurning on the power of multiple cameras1. Press the [MENU] button.Press the [MENU] button to light it.2. Select the [CAMERA] SYSTEM menu to display the[CAM POWER] item.CAMERACAMPOWERNON ON ーCAMLOCKAUTOPOWERAW-UE70Turning on the power of all the cameras3. Turn the F1 dial to select [ALL ON] and press the F1 dial.Turning on the power of the selected camera group3. Turn the F1 dial to select [GRP ON] and press the F1dial.