Panasonic AW-RP60G Operating Instructions Manual

Also see for AW-RP60G: Manual updating changes Operating instructions Operating guide

Contents

Panasonic AW-RP60G Operating Instructions Manual Manual pdf 22 page image

22Selecting a remote cameraYou can press a camera selection button [CAMERA SELECTION] to select the remote camera to control.When a camera selection button is pressed, the indicator of the pressed button turns on and the remote camera is selected.The status of the lamp (camera status LED) below each button indicates the status of the remote camera that is allocated to the camera selection button[1] to [5].zz Camera status LED and remote camera statusLED status Remote camera status Connection between unitand remote cameraOff zz The connection type of the corresponding camera number is set to [NON].zz Power is not being supplied to the remote camera.IP connection/serial connectionOn(amber)The remote camera is in the standby state.Turn the power on as described in “How to turn on the power of the remote cameras”(page 19).IP connection/serial connectionOn(green) The unit is connected to the remote camera. IP connection/serial connectionAbout camera selection buttons and camera status LED displayszz Camera status LEDLED status Remote camera stateOff Not connectedOn(amber) Camera standbyOn(green)zz Camera connectedzz Multiple AW‑RP60s connected to the camerazz Camera selection buttonsButton lightingstatus Remote camera stateOff UnselectedOn(green) G_TALLY ON (camera not selected)On(red) R_TALLY ON (camera not selected)On(amber)Selectedzz The camera also changes to this status if a camera with R/G_TALLY ON is selected.zz When a camera with R/G_TALLY ON is selected, the TALLY information is displayed onthe LCD panel.