Panasonic AW-RP60G Operating Instructions Manual

Also see for AW-RP60G: Manual updating changes Operating instructions Operating guide

Contents

Panasonic AW-RP60G Operating Instructions Manual Manual pdf 85 page image

85SpecificationsPower supply: 12 V DC ( ) (10.8 V to 13.2 V)42 V ‑ 57 V DC ( ) (PoE power supply)Current consumption: 0.9 A (XLR IN connector)0.3 A (PoE power supply)indicates safety information.GeneralAmbient operatingtemperature: 0 °C to 40 °C (32 °F to 104 °F)Allowable humidity: 20% to 90% (no condensation)Storage temperature: –20 °C to 50 °C (–4 °F to 122 °F)Weight: Approx. 1.5 kg (3.3 lb)Dimensions (W × H × D): 210 mm × 92 mm × 177 mm(8‑9/32 inches × 3‑5/8 inches × 6‑31/32 inches)(excluding protrusions)Input/output connectorsDC 12 V IN (XLR 4‑pin)LAN (RJ‑45) (with LED):10BASE‑T/100BASE‑TX, PoE inputConnection cable: LAN cable, max. 100 m (328 ft)zz When connecting the unit via a switching hub:Straight cable (category 5e), STP (ShieldedTwisted Pair) cable recommendedzz When connecting the unit directly:Crossover cable (category 5e), STP (ShieldedTwisted Pair) cable recommendedzz REMOTE:Available only for LAN (RJ45) controlSERIAL CONT (RJ‑45):RS‑422 (control signals for remote cameras),TALLY OUTConnecting cable:Straight cable (category 5e), max. 1000 m(3280 ft)TALLY OUT:Open collector output (negative logic)Maximum voltage resistance DC 24 V, Maximumcurrent 50 mATALLY/GPIO (D‑sub 25‑pin, female, inch thread):TALLY IN : Contact input (Status operation)GPIO IN : Contact input (Trigger operation)GPIO OUT : Open collector output (negative logic)Maximum voltage resistance DC 24 V, Maximumcurrent 10 mAzz Refer to page 86 for details about the pin layout.LCD panel3.5 inch LCD (QHD: 960 × 540)The symbols on this product represent the following:DC