Preparation18 For product assistance, visit www.panasonic.com/helpFor A assistance, visit www.joip.com4 Install the battery:Press the notch of the handset cover firmly, and slide it in the direction of thearrow (A). Insert the battery (B), and press it down until it snaps into position(C). Then close the handset cover (D, E).5 Charge the battery:Place the handset on the base unit.L If “Charge for 7 HRS” is displayed, wait for at most 15 minutes until“Please read joip Terms of Use. Agree?” is displayed.L To fully charge the battery, place the handset on the base unit for 7 hours. Forbattery information, see page 20.6 Agree to the A Terms of Use:To use the A IP line, read the Terms of Use for the A services on theincluded leaflet or at www.joip.com then press {YES} (left soft key) while“Please read joip Terms of Use. Agree?” is displayed.L To agree to the Terms of Use later, press {NO}. When you want to agree,press {IP} and wait until the display changes from “Free calls! Pluginternet cable. www.joip.com” to “Please read joip Terms ofUse. Agree?”. Press {YES} to agree to it.7 Check for Internet access:Wait until the STATUS indicator on the base unit turns green.– When the STATUS indicator on the base unit lights in green, the installation iscomplete. Your A number is displayed on the handset 1 (included with yourbase unit). Once you start operations with the handset, it disappears from thedisplay (page 30).CEDA BConfirm the chargeindicator is on.Model shown is BB-GT1500.[Please read joipTerms of Use.Agree?Y E S N O