16 Troubleshooting the BL-WV10A[For assistance, please call: 1-800-272-7033] 15116.6 Quick SetupIssue Causes and SolutionsThe camera cannot be setas a local camera.Are you attempting to perform Quick Setup on acamera already configured using a computer?• To use Quick Setup to set cameras alreadyconfigured on a computer as local cameras,you need to set the administrator name andpassword in Basic Settings to have the samevalues as those of the camera you wish toperform Quick Setup on.Is the firmware version of the camera out of date?• For the BL-C10A and BL-C30A, the firmwareversion must be 1.22 or higher.• For HCM series cameras, the firmwareversion must be 1.08 or higher.Does the camera support local cameraregistration?• Cameras with a zoom feature cannot beregistered as local cameras.Cameras that have been registered as remotecameras cannot be re-registered as localcameras even after re-initializing.• In the Camera Setup screen in normal mode,erase the camera, then re-initialize it, andthen perform Quick Setup.When performing Quick Setup on cameras when2 BL-WV10As are in use, those for one of the BL-WV10As will be registered as local cameras, butthose for the other BL-WV10A will be registeredas remote cameras.• First, make sure that the administrator nameand password for the cameras is identical onboth BL-WV10As. Next, connect the camerasto each BL-WV10A prior to connecting theBL-WV10As to each other.
