4 Recording Images72• See page 84 for more information on recording frame rates for sensorrecording.*When recording in LOW or LONG mode, a smaller image is recorded and theimage appears smaller during playback.• We recommend using a recording mode of either HIGH or LOW for sensorrecording.4.1 SD Memory CardsWe recommend using Panasonic SD memory cards with the BL-WV10A.(We cannot guarantee the performance of SD memory cards made by othermanufacturers.) Cards with capacities of up to 1 GB can be used.CAUTIONWhen the timer/access indicator is flashing amber, data is either being read fromor written to the card. When the indicator is flashing amber, do not do any of thefollowing:• Remove the SD memory card.• Turn off the BL-WV10A.• Press the FACTORY DEFAULT RESET button.Doing so can result in corrupted data on the SD memory card. If this occurs, thecard cannot be used and you will need to reformat the card with the BL-WV10A.All data on the card will be erased.Note• Do not use the SD memory card used for the BL-WV10A in other devices(digital cameras, video cameras, etc.). Only image data (movies andpictures) that were recorded with the BL-WV10A can be viewed with theRecord Mode Resolution Image Refresh IntervalHIGH 640 x 480 1 sec.LOW 320 x 240* 1 sec.LONG 320 x 240* 5 sec.Push the SD memory cardslightly, then remove itEjecting an SD memory cardTimer/AccessindicatorInserting an SD memory cardInsert labelside up,with notchon right side
