Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

12Touch Pad (Advanced)When you want to re-enable the touch pad and touchscreenWindows 20001 Uninstall the driver or application software of an external mouse or trackball device.(Refer to the operating instructions of the external device on how to uninstall thedriver.)If the explanation of uninstalling the driver or application software can not be found inthe operating instructions for the external device, execute the following steps.In [Control Panel] - [System] - [Hardware] - [Device Manager], when an external mouseor trackball device is displayed in [Mice and other pointing devices], press Del todelete it and then select [OK] to confirm the deletion.2 The display will ask you to restart Windows, select [No].3 Power off your computer ( “Starting Up/Shutting Down”) and remove theexternal mouse or trackball device.4 Turn the power on and run the Setup Utility ( page 63). In [Main] menu, set[Touch Pad] and [Touchscreen] to [Enable].5 Close the Setup Utility by pressing F10 . At the confirmation message, select [Yes].6 Log on to Windows with the administrator authority by using the keyboard. (Up tostep9, use the keyboard for all operations. The touch pad will not function until thecomputer restarts. Applications can be changed with Alt + Tab .)7 At [Digital Signature Not Found] screen*, press Enter .8 Press Enter to close the wizard screen*.9 The display will ask you to restart Windows*, press Enter .10 Perform the touchscreen calibration. ( page 16)* When the [Getting Started with Windows 2000] screen is displayed, these screens willbe displayed behind it. Press Enter one after another.The [Digital Signature Not Found] screen in step6 might not be displayed.When [PS/2 Compatible Mouse] is displayed in [Mice and other pointingdevices]:1 Double-click [PS/2 Compatible Mouse].2 Select [Driver] - [Update Driver], then select [Next].3 Select [Display a list of the known drivers....], then select [Next].4 At the [Update Device Driver Wizard], select [touchpad/touchscreen], thenselect [Next].5 Select [Next].6 If the message “Digital Signature Not Found” is displayed, select [Yes].7 Select [Finish], then select [Close].8 The display will ask you to restart Windows, select [Yes].NOTE