Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

67Setup UtilitySave Values & ExitExit Without Saving ChangesGet Default Values*Load Previous ValuesSave Current ValuesRefresh BatteryExit the Setup Utility and save your changes to CMOS.Exit the Setup Utility without saving your changes to CMOS.Set the default settings.Load previous values from CMOS for all Setup items.Save your changes to CMOS.Refreshing the Battery ( page 40)Exit MenuSave Values & ExitExit Without Saving ChangesGet Default ValuesLoad Previous ValuesSave Current ValuesRefresh Battery* This item may not be displayed when starting up the Setup Utility with the User Password.ParametersBoot MenuFloppy Drive*1Hard Disk DriveCD Drive*2LAN* 3The default order is as follows:[Floppy Drive] [Hard Disk Drive] [CD Drive] [LAN].To move a device up by one in the order, select the device with and , and then pressF6 .To move a device down by one in the order, select the device with and , and then pressF5 .Boot First MenuThe device for starting up the operating system can also be selected during computerstart-up. After the computer is turned on, and Esc is pressed at [Panasonic] screen,[Boot Menu] (the device selection display) will appear. When the setting of the [Boot]menu is changed, the selection screen display will also change. [Boot Menu] is dis-played only when [Boot First Menu] in [Security] menu is set to [Enable].NOTE*1 This is displayed even if a floppy disk drive is not connect or [Legacy USB Support] is set to [Disable]on [Advanced] menu.*2 This is displayed even if a CD drive is not connected.The following drive can be used for startup (recommended).• Panasonic USB floppy disk drive (optional:CF-VFDU03)*3 This is not displayed when [LAN] is set to [Disable] or [Boot up from LAN] is set to [Disable] on[Advanced] menu.