Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

49External DisplayExtended DesktopWith Extended Desktop, you can use both the internal LCD and the external display asan extended display domain. You can also drag a window from the internal LCD to theexternal display. To use Extended Desktop;1 Windows 2000Select [Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics] - [Devices].Windows XPSelect [Start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) ExtremeGraphics] - [Devices].2 Select [Extended Desktop], make the settings for [Primary Device] and [SecondaryDevice].To make the settings for each display (colors, screen area, etc.), select [Device Set-tings] and change the settings where necessary, then select [OK].3 Select [OK].At the confirmation message, select [OK].(To next page)There are some applications that cannot be used in the Extended Desktop.When the button to maximize a window is pressed, one of the displays will showthe maximized display.A window that has been maximized cannot be moved to the other display.You cannot switch the display destination by pressing Fn + F3 .When the Extended Desktop is being utilized;• The pop-up icon window is displayed only on the primary device.• Do not use the display rotation function.When changing the primary device ([1]) and secondary device ([2]), be sure tochange them in the following menu. If you use other procedures, the window maynot be displayed properly.Windows 2000[Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics] - [Devices] -[Extended Desktop]Windows XP[Start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics]- [Devices] - [Extended Desktop]About [Intel(R) Extreme Graphics]The selection of the display destination, adjustment of the brightness and contrast, andsetting of the hotkey to change the display destination can be done in the followingmenu.Windows 2000[Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics] - [Devices]Windows XP[Start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics] -[Devices]NOTE