Panasonic CF-73 Series Reference Manual

Also see for Toughbook CF-73 Series: Supplementary instructions User manual Supplementary instructions Operating instructions Service manual

78SD Memory Card Security FunctionIf the function fails to operate correctlyz The computer does not respond properly when you insert the SD Memory Card.Remove the card and wait a few seconds, then reinsert it. Or, enter the password.z The SD Memory Card indicator is blinking.Enter the password through the keyboard without removing the SD Memory Card.A software application, etc. may be accessing the SD Memory Card.z The password input screen appears on some occasions but not on others.If [Leave set] was selected as the setting method:• If an SD Memory Card is already inserted when starting the computer, the passwordinput screen or the Windows logon screen does not appear when the computer isstarted.• If an SD Memory Card is already inserted when resuming from the standby orhibernation mode, or the screensaver, the password input screen appears. Input thepassword.Even if [Leave set] is selected, do not leave the card in the SD Memory Card slot whenstepping away from the computer.If you have lost an SD Memory Card which had been configured with the security functionPerform the following procedure to ensure that the card you have lost will not be used withoutauthorization when starting the computer or when logging on to Windows.z If the card has been used when starting the computerA Start the SD Card Setup program. (Î page 72 Step1-3)The current settings will be displayed.B Remove the check mark from [Use the SD card when starting the computer].C Select [OK], and then follow the on-screen instructionsAll SD Memory Cards currently registered on this computer will no longer beusable when starting this computer.Even if you add the check mark again for [Use the SD card when starting thecomputer], the card you have lost will not be usable when starting the computer.z If the card has been used when logging on to windowsA Change the Windows logon password.The card will no longer be usable when logging on to Windows.