Panasonic CF-73 Series Reference Manual

Also see for Toughbook CF-73 Series: Supplementary instructions User manual Supplementary instructions Operating instructions Service manual

85External Display1 Power off your computer.(⇒ Operating Instructions "Starting Up/Shutting Down")Do not use the standby or hibernation function.2 Connect the external display to the external display port (A) on yourcomputer.3 Turn on the external display, then turn on your computer.4 Change the display destination.There are two methods to change the display destination. Do not change thedisplay destination using any method other than the following ones.z Press the Fn+F3 key. (Î page 5)• Extended Desktop switching cannot be used• Do not press any keys or press the power switch until the displaydestination has changed completelyz Use [Intel(R) GMA Driver for Mobile]A Select [start] - [Control Panel], and from the [See Also] area select [Other Con-trol Panel Options].B Select [Intel(R) GMA Driver for Mobile] - [Devices].C Select the display destination, and then select [Apply].• When the screen is displayed to an external display: [Monitor]• When the screen is displayed to the internal LCD: [Notebook]• When the screen is displayed to a simultaneous display: [Intel(R) DualDisplay Clone]• When Extended Desktop mode is set: [Extended Desktop] (Î page 86)D At the confirmation message, select [OK].5 Set the number of colors, resolution, etc.If simultaneous display or Extended Desktop is selected, click [Device Settings] tomake the settings.NOTEz The display destination after resuming from hibernation mode or after restarting maydiffer from the display destination before entering hibernation mode or beforerestarting.