Panasonic CF-73 Series Reference Manual

Also see for Toughbook CF-73 Series: Supplementary instructions User manual Supplementary instructions Operating instructions Service manual

98LANA Display [Device Manager] screen.Select [Device Manager] in [start] - [Control Panel] - [Performance andMaintenance] - [System] - [Hardware].B Select the network adaptor you are using from [Network adapters].C Select [Advanced].D Confirm the settings of each item.This is a function of the internal LAN to automatically power the computer on from a networkserver when the computer is in the standby or hibernation mode. To use this function, it isnecessary to have a network environment that accommodates Wake up from LAN.Enabling the Wake up from LAN FunctionA Select [Device Manager] in [start] - [Control Panel] - [Performance andMaintenance] - [System] - [Hardware].B Select the internal network adaptor from [Network adapters].C Select [Power Management], add the check mark for [Allow the computer to turnoff this device to save power] and [Allow this device to bring the computer out ofstandby], then select [OK].CAUTIONz Be sure to connect the AC adaptor, and enable the supply of power.NOTEz Even when a password is set in the Setup Utility and [Password on boot] is set to[Enable], it is not necessary to input the password set in the Setup Utility when thecomputer resumes from standby or hibernation mode.z The Wake up from LAN function will not operate under the following conditions:• When the computer has been shut down.• When the power switch is pressed over for four seconds or longer to turn off thepower (e.g., when the computer hangs).Wake up from LAN