CQ-C3305N30 CQ-C3305N 31 EnglishProblem Possible cause Possible solutionPS does not appeareven if an RDS stationis tuned in to.(“NO PS” appears.)A PS code cannot be received for the reason of bad receiving conditions, etc. A PS code appears if it is received. Wait for a while until conditionschange.Receiving programsdiffers from PTY thatwas already set up.When the station changed between programs, the unit could not receive the PTYcode. An appropriate programme is searched for and tuned in to after receiving acorresponding PTY code. Therefore, wait for a while.“NONE” appears whenselecting PTY.Any specifi ed PTY programs cannot be received. There is no desired programmebeing broadcast in your area. Select another PTY, or wait until a desired programme starts.The clock time (CT) isnot accurate.The unit received a station broadcasting time that is not appropriate for you, orthe unit is receiving a station that does not broadcast time. Receive a station broadcasting time that is appropriate for your area, oradjust CT manually.An AF station cannotbe received even if AFindicator lights.There is little difference in receiving conditions between the current station andAF stations. Update of the AF list ended in failure. Wait until the AF list is successfully updated. For unstable reception, tunein to a stable station by the hand.Troubleshooting, Error Display MessagesRDSCDTroubleshootingProblem Possible cause Possible solutionNo playback or discejectedThe disc has unplayable formatted data. Refer to the description about MP3/WMA for playable sound data exceptCD-DA (i.e. music CD).The CD-R/RWs thatare playable onother devices are notplayable on this unit.The playability of some CD-R/RWs may depend on the combination of media,recording software and recorder to be used even if these CD-R/RWs are playableon other devices such as a PC. Make CD-R/RWs in different combination of media, recording software andrecorder after referring to the description about MP3/WMA.Sound skipping ornoiseThere is a fl aw or foreign material on the disc. Remove the foreign material, or use a flawless disc. For MP3/WMA, referto the description about MP3/WMA.Playing Variable Bit Rate (VBR) fi les may cause sound skipping. Play Non-VBR fi les.MP3/WMADisplay Possible cause Possible solutionThe disc is dirty or upside down. Check the disc.The disc has scratches. Check the disc.(After 5 seconds)No operation by some cause. Unplug the power cord and plug it again. In case the unit is still out oforder, consult your dealer. ( Installation Instructions)(After 5 seconds)To next fi le automaticallyThe player for some reason cannot read the fi le you are trying to play. (Filerecorded in an unsupported fi le system, compression scheme, data format, fi lename extension, damaged data, etc.) Select a fi le that the player can read. Check the type of data recorded on thedisc. Create a new disc if necessary.(After 5 seconds)To next fi le automaticallyA WMA fi le can be copyrighted. The fi le protected by copyright is not playable.Note: Refer to the System Upgrade Guidebook for error messages regarding optional products.CD/MP3/WMAError Display MessagesNo playback or discejectedThe disc is inserted upside down. Insert a disc correctly.There is a fl aw or foreign material on the disc. Remove the foreign material, or use a fl awless disc.Sound skipping ornoiseThere is a fl aw or foreign material on the disc. Remove the foreign material, or use a fl awless disc.Sound skipping due tovibrationThe unit is not suffi ciently secured. Secure the unit to the console box.The unit is tilted at over 30˚ in the front-to-end direction. Make the angle 30˚ or less.Disc unejectableSomething such as a peeled label obstructs the disc coming out. Consult your dealer.The microcontroller in the unit operates abnormally due to noise or other factors. Unplug the power cord and plug it again. In case the unit is still out oforder, consult your dealer.