Panasonic CQ-C3305N Operating Instructions Manual

Contents

CQ-C3305N8 CQ-C3305N 9EnglishControls LayoutNote: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)Main UnitVOL Volume( page 11)PUSH SEL Select( page 24, 26)LIST ( P16 of System Upgrade Guidebook)DISC ( P12 of System Upgrade Guidebook)FOLDER ( page 20)MUTE ( page 11)SQ Sound Quality ( page 25)Remote control sensorTA Traffi c Announcement ( page 16)AF Alternative Frequency ( page 15)SOURCE ( page 11)PWR Power ( page 10)TUNE ( page 12)TRACK (FILE) ( page 18, 20)BAND ( page 12)Play/Pause( page 18, 20)APM Auto Preset Memory( page 13)OPEN ( page 18, 20)DISP Display ( page 10)PTY Programme Type( page 17)Remote Control Unit (Option)Controls Layout, PreparationAUX1 ( page 11)1 to 6 ( page 12)3 (SCROLL) ( page 19, 21)4 (RANDOM) ( page 19, 21)5 (SCAN) ( page 19, 21)6 (REPEAT) ( page 19, 21)Notes:• Remote Control Unit for CQ-C3305N is option (CA-RC80N).• The optional remote control is available from your local dealer. (CA-RC80N)PowerMode(Source)TuneTrack selectionFast forward/fast reverse(CA-RC80N)Mute/attenuationVolumeBandPausePreparationThe demonstration message appears for initial use.1 Set your car’s ignition switch to theACC or ON position.2 Press [PWR] (Power).The demonstration screen appears.3 Hold down [VOL] (PUSH SEL: Select)for 2 sec. or more to open the menu.4 Press [VOL] (PUSH SEL: Select) toselect the Demonstration setting.(“DEMO” is displayed.)5 Turn [VOL] counterclockwise.Notes:• To return to the regular mode, press [DISP].• Refer to the section on “Function Setting” ( page26).• When “NO DISC” is displayed, the Demonstrationcannot be cancelled.Cancellation of DemonstrationACC SettingThe 24-hour system is used for the clock.1 Press [PWR] (Power).2 Select the radio AM (LW/MW) mode.(page 12)3 Hold down [DISP] for 2 sec. or more.4 Adjust the hour and press [DISP].[]: Forward[]: Backward5 Adjust the minute and press [DISP] toconfi rm the adjustment.[]: Forward[]: BackwardNotes:• Adjust the clock when “NO CT” appears on the display.• Hold down [] or [] to change numbersrapidly.• When a broadcast of FM Radio Data System isreceived, the clock is adjusted automatically by theClock Time service. ( page 14)Clock AdjustmentCaution• Be sure to select OFF when your car hasno ACC position in the ignition switch.Failure to do this could cause the batteryto go dead.For an ACC-equipped car, select ON. ( page 27) Thefollowing functions are available. (Default: off)• The power is turned on automatically when inserting adisc.• The clock can be displayed even if the power is off. (page 10): ACC not equipped(Default): ACC equippedOFF ACCIGN