Display Setting English37CQ-C8351N/C8301N/C7301N36 CQ-C8351N/C8301N/C7301NDisplay SettingAdjustment to display on the DISPLAY menuDISPLAY Menu Display1 Press [MENU] to display the menudisplay.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press []] or [[] to display theDISPLAY menu.3 Press [}] or [{]to select a functionto be adjusted.4 Press [BAND](SET) to confirmthe display.5 Adjust the setting value.6 Press [BAND] (SET) to confirm theadjustment.7 Press [MENU].For using the remote control, hold down [SEL](MENU) for 2 sec. or more.PTYCQ-C8301NPTYCQ-C8301NGRAPHIC PATTERN(Setting range: 6 types, default: ALL)Switching by []] or [[]ALL: Sequential display from pattern A to D.Pattern A to DS.A.: 19-band display (Spectrum analyzer)STILL IMAGE(Setting range: 11types, default: ALL)Switching by []] or [[]ALL: Sequential display from pattern 1 to 10No.1 to 10CONTRAST(Setting range: 1 to 5, default: Contrast 3)[[]: Tilting up view angle[]]: Tilting down view angleCLOCK ADJNote: Adjust the clock when “NO CT” appears on thedisplay.[[]: Adjusting minutes[]]: Adjusting hours[}]: Forward[{]: BackwardNotes:¡ The graphic pattern and still image are changeable.(a page 38)¡ If corrupted data is selected, “DISPLAY FILE INCOM-PLETE” appears. (a page 39)DISPLAY Menu DisplayCOLOR(Setting range: 10 types, default: STORM)The illumination color changes as follows.Switching by [}] or [{]STORM: The color varies in conjunction with time.LEVEL: The peripheral color decoration lights up and goes outaccording to the bass volume.FIRE: RedORANGE: AmberSKY: BlueOCEAN: AquablueFOREST: GreenSUN: YellowSNOW: WhiteCUSTOM: You can create your favorite color.LEVEL ADJ[]][[]: Function selection[}][{]: Item selectionColor selectionThe illumination color changes.(Setting range: FIRE, ORANGE, SKY, OCEAN, FOREST,SUN, default: FIRE)Volume setting according to lighting(Setting range: LEVEL1, LEVEL2, LEVEL3, default: LEVEL 1)If the peripheral color decoration keeps lighting becausethe bass part is contained abundantly, select LEVEL 1,and for the opposite case, select LEVEL 3.CUSTOM ADJ(Setting range: 0 to 100, default: R50, G50, B50)You can adjust each color.[]][[]: RGB selection[}][{]: Adjustment (0 to 100)SCREENPress [BAND] to select.: white background (default): black background