General EnglishCQ-C8351N/C8301N/C7301NPower onPress [SRC] (PWR: POWER).Note: The opening screen appears. You can overwriteopening screen (moving image) with new one.(a page 38)Power offHold down [SRC] (PWR: POWER) untilyou hear a beep, then release it.Note: The ending screen appears at ACC on setting. Youcan overwrite the ending screen (moving picture) withnew one. (a page 38)12GeneralThis chapter explains how to turn on or off the power, how to adjust the volume, etc.CQ-C8351N/C8301N/C7301N 13You can remove the faceplate to prevent it frombeing stolen.Removing1 Turn off the power (a page 12)2 Press [ ](Release).(The face plate disen-gages with a clickwhen it is removed.)The face plate automatically closes after a lapse of 5seconds while it is open.Note: The power is automatically turned off whilethe unit is active.3 Put the faceplate in the case.Mounting1 Slide the left side of the face plate inplace.2 Press the right end of the face plateuntil “click” is heard.Caution¡ It is recommended to remove or mount the faceplate when the plate is at the closed position.Do not remove or mount the face plate when theplate is in motion.¡ This face plate is not waterproof. Do not expose it towater or excessive moisture.¡ Do not remove the face plate while driving your car.¡ Do not place the face plate on the dashboard ornearby areas where the temperature rises to highlevels.¡ Do not touch the contacts on the face plate or on themain unit, since this may result in poor electricalcontacts.¡ If dirt or other foreign substances get on the con-tacts, wipe them off with clean and dry cloth.¡ To avoid damaging the face plate, do not push itdown or place objects on it while it is open.Open/EjectPress [ ] (OPEN).When a disc is already loaded, the disc will automaticallybe ejected.ClosePress [ ] (OPEN).TiltThe display angle changes among 4 levels as followsevery time you hold down [ ] (TILT) for 1 sec. ormore and release.Note: The last selectedangle is memorized evenafter turning off the power.Notes:¡ The volume level can be set independently for eachsource. (For radio, one volume setting for AM, onevolume setting for all FMs)¡ The volume is not adjustable while an error appearson the monitor or the external mute function isenabled. (a page 44)q Upw DownSetting Range: 0 to 40default: 18Volume off (down)Press [ ] (MUTE).CancelPress [ ] (MUTE) again.Note: Volume-down range can be specified.(a page 35)AFSRCPTYCQ-C8301NSQTAPTYCQ-C8301NAFSRCPTYCQ-C8301NSQTAAFSRCPTYCQ-C8301NSQTAPower On/off(PWR: POWER)Face Plate Motion (Open/Close, Tilt)(OPEN/CLOSE, TILT)Volume Adjustment(VOLUME)Temporary Volume Off (Down)MUTE (ATT: ATTENUATION)Cautions:¡ To avoid damaging the face plate, do not push itdown or place objects on it while it is open.¡ Do not pinch your finger or hand in the face plate.¡ Do not insert foreign objects into the disc slots.¡ For the following cases, the face plate automatical-ly closes. Use caution not to catch your finger.¡ After a lapse of 20 seconds¡ When a disc is inserted¡ When the face plate is removed (a page 12)TILT 1TILT 2TILT 3OPENTILT OFFFace Plate Removing/Mounting(ANTI-THEFT)SRC