Panasonic CQ-C8301N Operating Instructions Manual

Also see for CQ-C7301N: Service manual

Contents

39CQ-C8351N/C8301N/C7301NEnglishCustomize the Display38 CQ-C8351N/C8301N/C7301NNotes on Customize FunctionNote on Download ServiceThe download service may be suspended or stoppedwithout advance notice. The download service is notavailable in some areas. Please visit the site below forfurther information.Panasonic Web site:(http://www.panasonic.co.jp/global/)Notes on IMAGE STUDIO¡ This download service is not available in some areas.For details, please access the Panasonic website.¡ IMAGE STUDIO is available only by downloading fromthe address below. It is not bundled with this unit.¡ Refer to the downloaded operating manual for how touse IMAGE STUDIO.Notes on File¡ The customize-specific file is downloadable from theURL below. You can create exclusive files stored witha digital camera or other devices by using exclusivesoftware, IMAGE STUDIO that can be accessed fromthe same URL.¡ Do not change the extension. Otherwise, the data can-not be recognized.At Disc Making¡ Save only customize-specific data.¡ Save all data in the root directory. Files contained in afolder cannot be recognized.¡ Follow the table below with regard to the number offiles that are saved to a disc. Files beyond the speci-fied capacity are not readable.¡ Discs recorded by the packet writing software are notsupported.At Customizing¡ If customizing is interrupted on account of turning offthe power, stopping the engine, removing the faceplate or other reasons, you may lose the data. In sucha case, try customizing again.¡ The default image exists on the Panasonic Web site. Ifyou would like to restore it, download the image fromthe site.Error Display MessagesNO FILES DETECTEDNo customize-specific data on the disca Load a disc that contains customize-specificdata.CUSTOMIZING FAILEDCustomize faileda Check to see whether or not the extension is cor-rect and file contents are appropriate.DISPLAY FILE INCOMPLETEIntended moving image or still image is damaged.a Customize it again and overwrite the file withnew one.Type Extension Max. numberGRAPHIC PATTERN .pfm 10STILL IMAGE .pfs 15OPENING MESSAGE .pfo 5CLOSING MESSAGE .pfe 5Download site:http://panasonic.co.jp/pas/en/software/customize/index.htmlCustomize the DisplayYou can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded fromthe Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,IMAGE STUDIO. See “Notes on Customize function” (a page 38) as well.Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.CUSTOMIZE Menu DisplayPreparation:Put the CD-R/RW that contains data tobe customized in hand.1 If there is a disc inside, take out thedisc.2 Press [SRC:SOURCE] toselect the CDmode.3 Hold down [SEL] for 4 sec. or more todisplay the menu screen.4 Load a CD-R/RW that contains data.Note:¡ It may take time for the unit to identify the CD-R/RW.¡ Discs recorded by the packet writing software arenot supported.5 Select an item to be customized.[}][{]: Select[BAND] (SET): ConfirmNote: To exit the customize menu, hold down[SEL] 4 sec. or more.GRAPHIC PATTERNMoving image (graphic pattern) data (a page 37)STILL IMAGEStill image data (a page 37)OPENING MESSAGEMoving image at power on (a page 12)CLOSING MESSAGEMoving image at power off (a page 12)Note: The closing message appears only when ACCis set to on.6 Select a file.[}][{][]][[]:Select[BAND] (SET): ConfirmNotes:¡ Files are automatically identified by their exten-sions, and target files are displayed.¡ If ”BACK” is selected, the screen of step 5appears.7 For a moving image file or still imagefile, select where to save the file.[}][{][]][[]: Select[BAND] (SET): ConfirmNotes:¡ New data overwrites existing data.¡ If “BACK” is selected, the screen of step 6appears.8 Confirm the changed item.[]][[]: Select[BAND] (SET): ConfirmCustomization is performed. Do not turn off thepower in mid-operation. (It takes approx. 1 minute tocomplete this operation for a 168 kB moving image.)After completion of this operation, the screen of step5 appears.Note: If “NO” is selected, the screen of step 5appears.9 Press [OPEN] to eject the disc.10 Hold down [SEL] for 4 sec. or more.The CD mode comes back.AFSRC SQTASRC