Panasonic CQ-C8301N Operating Instructions Manual

Also see for CQ-C7301N: Service manual

Contents

General EnglishCQ-C8351N/C8301N/C7301N 1716GeneralCQ-C8351N/C8301N/C7301NSQ Selection Based on Genre(SQ: SOUND QUALITY)The sound type each of which is adjusted with 7 bandschanges every time you press [SQ: SOUNDQUALITY].1. FLAT(default)2. ROCK3. POPLights when activated.4. VOCAL5. JAZZ6. CLUBNotes:¡ Setting of SQ, bass/treble and volume are influencedone another. If the influence mentioned above causesdistortion to the audio signal, readjust bass/treble orvolume.¡ Each SQ (except FLAT) level is changeable. (a page17)AFSRCPTYCQ-C8301NSQTAYou can make fine adjustments to the currently selectedSQ presetting in ROCK, POP, VOCAL, JAZZ, or CLUB inaccordance with your car type or taste.1 Hold down [SQ: SOUND QUALITY] for2 sec. or more.The targeted SQ preset appears.2 Adjust each frequency.Note: If you press [DISP], the presetting is can-celed. The presetting is active until another SQ pre-set is called up.[[]: Higher frequency[]]: Lower frequencyq : Level Upw : Level Down3 Hold down [}] or [{] for 2 sec. ormore to confirm your adjustment.Note: You can select a SQ preset to be targetedwith [}] and [{] (and [2] to [6] on the remotecontrol).4 Hold down [}] or [{] for 2 sec. ormore to confirm your adjustment.The existing adjustment is overwritten with newadjustment.Notes:¡ FLAT is not changeable.¡ If no operation takes place for more than 10 sec-onds, the display returns to the regular mode.¡ This adjustment is executable in the AUDIO menuas well. (a page 34)¡ If you hold down [BAND] for 2 sec. or more onthe SQ call-up screen, the presetting that is calledup can be turned into the default.AFSRCPTYCQ-C8301NSQTAChange of SQ PresettingSQ SQ