Panasonic CQ-DVR7000U Operating Instructions Manual

Also see for CQ-DVR7000U: Operating manual

Adjust the Speaker Delay TimesSet a delay for the output from center and surround speakers so that the sound from theother speakers reaches the listening position at the same time as the front speakers.Combining the Speaker OutputWhen listening to Dolby Digital encoded material (the “Î DIGITAL” indicator willlight), the signals for each speaker channel can be combined and output as stereo.(Down Mix)Adjust the Speaker Output LevelsUsing a test signal, adjust the audio output of each speaker so that the volumelevel from every speaker sounds equal. (Adjustable range: 0 to `12 dB)ENGLISH11ENGLISH12CQ-DVR7000U CQ-DVR7000U30 31Setting Up the Speakers (continued) Indicates pressing a button.8 Down MixNotes:≥OFF is recommended as the setting when surround speakers and center speaker are used.≥In the PRIVATE MODE (➡page 60), the disc will be played with Down Mix at "ON"regardless of the setting which has been selected.5-6 SpeakerDelayMake settings31. 0.0 msec2. 1.3 msec3. 2.6 msec4. 3.9 msec5. 5.3 msec6. ReturnSelectSpeaker Delay1. 0.0 msec2. 5.3 msec3. 10.6 msec4. 15.9 msec5. ReturnSelectSpeaker DelayCenter Speaker Surround SpeakerMake settings31. ON2. OFF3. ReturnSelectDown Mix1. ON : Down Mix (2-channel stereo playback)Use this setting when only front speakers areconnected.≥ The C, LS, and RS signals are combined withand output through L and R.2. OFF : Recorded signal format(Example: 5.1-channel surround playback)(default)3. Return : The display returns to Main Menu.1. 0.0 msec (default)2. 1.3 msec3. 2.6 msec4. 3.9 msec5. 5.3 msec6. Return: The display returns to Main Menu.1. 0.0 msec2. 5.3 msec (default)3. 10.6 msec4. 15.9 msec5. Return: The display returns to Main Menu.7 SpeakerLevelThe speaker (in yellow) specified by the number buttons outputs a test signal.The setting value is shown on the main unit display.Upon completion of the speakersettings, select "7. Return" and exit. (default : 0dB)To adjust the test signal volume:VOLNotes:≥ The test signal is not output from a speaker for which “`¶” was set. (➡ page 55)≥ After increasing the volume level and adjusting the test signal, restore the original optimumvolume level.Press1. L ch2. C ch3. R ch4. RSch5. LS ch6. SW7. ReturnSelectSpeaker1. L ch2. C ch3. R ch4. RSch5. LS ch6. SW7. Return: The display returns to Main Menu.What has been set will be reflected only withDolby Digital play.What has been set will be reflected only whenDolby Digital play is performed or when ON isset for PROLOGIC.To adjust the speaker level:ENTERPressL CLFESLS RSDOWN MIXRS WREAR PLAYLights when Down Mix is ON.