8. D. Range CompressionAdjust the level at which the audio signals are to be output in the PRIVATE MODE.7. Audio Output Level6. On-Screen Messages5. TV Mode4. TV AspectENGLISH29ENGLISH30CQ-DVR7000U CQ-DVR7000U48 49Changing the Initial Settings (continued)Make Settings3TV picture mode (4:3)Set this when playing wide-screen video on a conventional-size(4:3) TV.1. Pan & Scan: Plays wide-screen video in Pan & Scan mode(in which the left and right edges of the screenare cut off) (default)2. Letterbox: Plays wide-screen video in Letter Box mode(in which black bands appear at the top andbottom of the screen)3. Return: The display returns to Main Menu.This is to select On-Screen Display messages which will bedisplayed when On-Screen Display is turned off by pressing[OSD].(➡ Page 41)1. ON: When the power is turned on, On-Screen Displaymessages such as “Play” and “Pause” will always bedisplayed on the screen for 5 seconds.(default)2. OFF: When the power is turned on, On-Screen Displaymessages such as “Play” and “Pause” will not bedisplayed on the screen.3. Return: The display returns to Main Menu.Note:≥ If “Pan & Scan” or “Letterbox” is already set in the software, this setting is ignored.1. 4:3 : Use this setting when a conventional TV Monitor isconnected.2. 16:9 : Use this setting when a wide-screen TV Monitor isconnected. (default)≥ Wide screen video can be played on the full screen.3. Return: The display returns to Main Menu.1. 4 : 32. 16 : 93. Return<TV Aspect>SelectTV Aspect1. Pan & Scan2. Letterbox3. Return<TV Mode>SelectTV Mode1 ON2 OFF3 Return<On-Screen Messages>SelectOn-ScreenMessagesMake Settings31. 1 (Minimum level)2. 2 (Middle level)3. 3 (Maximum level) (default)4. Return: The display returns to Main Menu.For your reference:We recommend that you select the initial setting when you use this player in the systemconfigurations (➡ Pages 70-72), and adjust the volume control on the display unit connected tothis unit.Dynamic Range CompressionBy compressing the range of the playback level (the dynamicrange), it is possible to maintain the impact of audio even at lowvolumes.This function only works with Dolby Digital encoded material.1. Minimum: Most compressed mode like TV broadcasts, etc.“DR COMP” lights.2. Standard: Mode recommended by software creators forlistening at low volumes.“DR COMP” lights.3. OFF: Does not compress the dynamic range.(default)4. Return: The display returns to Main Menu.Note:≥ When it is difficult to hear comparatively quiet sounds (suchas movie dialogue), setting “Minimum” will make thosesounds easier to hear.1. 12. 23. 34. Return<Audio Output Level>SelectAudio OutputLevel1 Minimum2 Standard3 OFF4 Return<D.Range Compression>SelectD.RangeCompressionOFFConversation levelStandardMinimumCD