Panasonic CQ-DVR7000U Operating Instructions Manual

Also see for CQ-DVR7000U: Operating manual

SOURCERETURNTITLESUBTITLEAUDIOANGLESCANREPEATTRACKS•MODECAR DVD PLAYER/RECEIVERTITLE / CHAPTERSTOPTRACK / SEARCHPAUSEPLAYBANDRETOSDGRP1234567890MENUENTERVOLMUTESEL"#PWRP•MODERANDOMThe clock uses a 12-hour display.ENGLISH13ENGLISH14CQ-DVR7000U CQ-DVR7000U32 33Common OperationsPower [PWR]≥ Turn the power on.≥ The first time that you turn the unit on,the radio will begin playing and themessage “Panasonic Presents……”(demonstration mode) will bedisplayed.To cancel the demonstration mode:To turn the power off:Note:≥ Loading/ejecting a disc also turnsthe power on/off. (➡ page 36)Volume [VOL "#](Adjustable range: 0 to 40):Increases the volume.:Decreases the volume.Note:≥ When you switch the source, the volumethat was set last for that source isrestored. (Intelligent Volume)Before performing any of these operations, turn your car’s ignition switch to “ACC” or “ON”.VOLSELTUNESOURCEOSDCQ-DVR7000UDVD RECEIVER WITH CHANGER CONTROLDISPS • MODEP • MODEOPENPWRTRACKDISCP • SETBANDREMOTE PLAYMUTEP1 2CH • C(depends on the disc)(Auxiliary source)(Radio)(When a separate CDchanger is connected)AUXILIARYCHANGERDVD VIDEOTUNERAudio Source [SOURCE]SOURCEPWRSOURCEPWRVOLSOURCEPWRB To turn the power off:SOURCEPWRHold (1 second)PressPressPress"#DISPWhen using the main unitDISPPressACVOLABCSetting the Clock% $To display the time:Press the button repeatedly until the time is displayed.≥ “ADJUST” will be displayed when the clock is not adjusted.DISPPress3 Finalize the time setting.≥ The clock begins to run.DISPPressF 10 : 352 Switch between the hours and minutes displays, and set both.1DISPHold(2 seconds) F 12 : 00SOURCEPWRPressTUNETRACKDISCP•SET Increases the number inthe selected display.TUNETRACKDISCP•SETSelects the hours display,which begins to blink.Decreases the numberin the selected display.Selects the minutes display,which begins to blink.Indicates pressinga button.Indicates pressing abutton for an extendedperiod of time.Indicates operationsthat can only beperformed throughthe main unit.Hold (1 second)❐ When “/” is displayedInput is not possible because a soundtrack, subtitle language or angle number which was not recordedon the disc has been selected or because the user has attempted to perform an operation which is notsupported by the unit.