Panasonic CQ-VA7300N Operating Instructions Manual

Contents

Panasonic CQ-VA7300N Operating Instructions Manual Manual pdf 12 page image

2321ENGLISH22ENGLISHCQ-VA7300N CQ-VA7300N223 SettingVOLVOLVOLNAVINAVIGATIONASPASPECTTILTMUTEMUTEMUTEDISPPTYTA AFMONO/STENTERMODEPOWERMENUEON PTY CTIN-DASH 7 INCH COLOR LCD MONITOR WITH RECEIVERCQ-VA7300NLOUDTRACKTUNEPRESET / DISCOPEN / CLOSECQ-VA7300NENTERMODE MENU1 2[ENTER][}] [{][] ] [[ ](Select/adjust)[MENU][MODE](End)User SettingsMenu SubmenuDisplay UnitTILT (Tilting angle adjustment)Default: 5Setting range: 1 to 5OPEN/CLOSEAutomatic monitor OPEN/CLOSE in accordancewith ACC ignition switch ON/OFFDefault: MANUAL Notes:¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.¡The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit for morethan 1 second. (a page 11)54321Tilting angle adjustmentPress []] or [[] to select the setting.TILT []] [[]Monitor setup: no interlock between monitor OPEN/CLOSE and ACCON/OFF: interlock between monitor OPEN/CLOSE and ACC ON/OFF( )ACC ONAUTOMANUALOPEN/CLOSEq Press [}] or [{] toselect “DISPLAY UNIT ”.w Press [ENTER] to set.DISPLAY UNITq Press [}] or [{] toselect “CLOCK”.w Press [ENTER] to set.CLOCKq Press [MENU] todisplay the menu.w Press [[] or []] toselect “USER”.RDSSCREENSOUNDUSER*Make selection and adjustment.*Make a selection.Clock display for the monitor: clock display ON ([0:00] is displayed before adjustingthe clock.): clock display OFFClock preference: The clock is automatically adjusted using the RDS clock timeservice function. (a page 14): Manually adjusted time is displayed.Adjusting the clock manually: Press []] to adjust the hour.: Press [[] to adjust the minute.00/M0/HADJUSTMANUALRDSCLOCK MODEOFFONDISPLAYNotes:¡To change numbers rapidly while adjusting cock, hold []] or [[].¡The clock starts by pressing [MODE] or [MENU] after clock adjustment.Clock SettingDefault: DISPLAY...OFFCLOCK MODE...RDSADJUST...0/H, 00/MNotes:¡The clock starts after the unit returns to theregular mode by pressing [MODE].¡The 24-hour clock system is adopted.¡Press [MODE] (End) to close the main menu and the setting/adjustingmenu.¡Press [MENU] in the setting/adjusting menu to return to the mainmenu mode.21q [}] and [{] buttons move thecursor vertically.w [[] and []] buttons move thecursor horizontally.e To set, press [ENTER].*Making selection and adjustment on the Menu.PWRMODECH 114TAAFLOCENTERMUTELOUDVOLUMECAR AVNAVINAVIGATIONSCROLLDISPASPECTMENUP·MODEPTY5623RANDOM SCANREPEATCH 2ENTERMENU[}] [{][] ] [[ ](Select/adjust)[ENTER][MODE] (End)[MENU]Note: The menu RDS cannot be selected in themodes other than FMmode.