Panasonic CQ-VA7300N Operating Instructions Manual

Contents

Panasonic CQ-VA7300N Operating Instructions Manual Manual pdf 15 page image

2927ENGLISH28ENGLISHCQ-VA7300N CQ-VA7300N283 SettingUser Settings (continued)1 2Menu Submenuq Press [MENU] todisplay the menu.w Press [[] or []] toselect “USER”.RDSSCREENSOUNDUSER q Press [}] or [{] toselect “etc”.w Press [ENTER] to set.etcSetting ACC selection ON and OFF: set to ON if your car has ACC position.: set to OFF if your car has no ACC position.OFFONACC SELButton operation sound: operation sound (Beep) ON: operation sound (Beep) OFFOFFONBEEPUseful FunctionsBEEPNote: You cannot mute a beep and a securityalarm that are generated when opening orclosing the display.Default: ONACC SELDefault: OFFCaution: Be sure to select OFF whenyour car has no ACC position in the igni-tion switch. Failure to do this could causethe battery to go dead.SECURITY LEDAllows you to activate the anti-theft functionwhen leaving your car.Default: ONVIDEO-CNT (VIDEO CONTROL)This “Video Control Setting” is required whenyou connect a Panasonic car navigation sys-tem with a built-in DVD player.Default: VTR 1MEMORY CLEARThis product retains setting information even ifthe battery is disconnected. However, “MEMORYCLEAR” allows all setting information to be resetto default settings.Default: NOCaution: Be aware that this functionrestores the unit to default settings, so thatall the memories and settings that you haveset will be lost.The security system operates as follows under conditions as described below.: when the power of this unit is turned OFF...: when the key in the ignition is turned OFF...¡Security message will be displayed and the panel removal alarm will be active.(a page 49)¡When the front panel is removed, the security indicator blinks. (a page 49)ACC ONNO ACC*Make a selection.Clearance of memory: no memory clear.The display returns to the menu.: default settingsYESNOMEMORY CLEARVideo control setting: connected to the VTR1-IN: connected to the VTR2-INNotes:¡Select a terminal connected to the DVD output terminal of a Panasonic carnavigation system with a built-in DVD player through an RCA cord.¡When you connect a Panasonic car navigation system with a built-in DVDplayer, connect a video control lead as well. (a page 60-61)VTR2VTR1VIDEO-CNTSetting security indicator ON and OFF: security indicator on after front panel removal: security indicator off after front panel removalOFFONSECURITY LEDPWRMODECH 114TAAFLOCENTERMUTELOUDVOLUMECAR AVNAVINAVIGATIONSCROLLDISPASPECTMENUP·MODEPTY5623RANDOM SCANREPEATCH 2ENTERMENU[}] [{][] ] [[ ](Select/adjust)[ENTER][MODE] (End)[MENU]VOLVOLVOLNAVINAVIGATIONASPASPECTTILTMUTEMUTEMUTEDISPPTYTA AFMONO/STENTERMODEPOWERMENUEON PTY CTIN-DASH 7 INCH COLOR LCD MONITOR WITH RECEIVERCQ-VA7300NLOUDTRACKTUNEPRESET / DISCOPEN / CLOSECQ-VA7300NENTERMODE MENU[ENTER][}] [{][] ] [[ ](Select/adjust)[MENU][MODE](End)¡Press [MODE] (End) to close the main menu and the setting/adjustingmenu.¡Press [MENU] in the setting/adjusting menu to return to the mainmenu mode.21q [}] and [{] buttons move thecursor vertically.w [[] and []] buttons move thecursor horizontally.e To set, press [ENTER].*Making selection and adjustment on the Menu.Note: The menu RDS cannot be selected in themodes other than FMmode.