Panasonic CQ-VA7300N Operating Instructions Manual

Contents

Panasonic CQ-VA7300N Operating Instructions Manual Manual pdf 16 page image

3129ENGLISH30ENGLISHCQ-VA7300N CQ-VA7300N303 SettingSound SettingsBass/TrebleDefault: ±0 dBSetting range: –12 dB to +12 dB (2 dB steps)Press [}] or [{] toselect “TONE”.TONEBalance/FaderDefault: CenterSetting range: 15 levels for eachPress [}] or [{] toselect “BAL/FAD”.BAL/FAD: enhance bass and treble tones at low or medium volume: OFFNote: The loudness setting can be also switched between ON and OFF by press-ing and holding [MUTE](LOUD) on the main unit for more than 2 seconds.OFFONBass adjustmentTreble adjustmentTREBLEBASSLoudnessDefault: ONPress [}] or [{] toselect “LOUD”.LOUDq Press [}] or [{] toselect “SUB-WOOFER ”.w Press [ENTER] to set.SUB-WOOFERSubwoofer ControlLEVEL (Subwoofer Volume Level)Default: 4Setting range: 0 to 7LPF (Subwoofer Low Pass Filter (Cut off fre-quency))Select the upper limit frequency of the soundfrom Subwoofer.Default: 120 Hz1 2Menu Submenuq Press [MENU] todisplay the menu.w Press [[] or []] toselect “SOUND”.RDSSCREENSOUNDUSERSubwoofer volume levelLEVELSubwoofer low pass filter (Cut off frequency): 120 Hz: 80 Hz80 Hz120 HzLPFNote: No sound comes out from Subwoofer when set to level 0.*Make selection and adjustment.FrontRearLeft RightCenter*Make an adjustment.*Make a selection.*Make selection and adjustment. PWRMODECH 114TAAFLOCENTERMUTELOUDVOLUMECAR AVNAVINAVIGATIONSCROLLDISPASPECTMENUP·MODEPTY5623RANDOM SCANREPEATCH 2ENTERMENU[}] [{][] ] [[ ](Select/adjust)[ENTER][MODE] (End)[MENU]VOLVOLVOLNAVINAVIGATIONASPASPECTTILTMUTEMUTEMUTEDISPPTYTA AFMONO/STENTERMODEPOWERMENUEON PTY CTIN-DASH 7 INCH COLOR LCD MONITOR WITH RECEIVERCQ-VA7300NLOUDTRACKTUNEPRESET / DISCOPEN / CLOSECQ-VA7300NENTERMODE MENU[ENTER][}] [{][] ] [[ ](Select/adjust)[MENU][MODE](End)¡Press [MODE] (End) to close the main menu and the setting/adjustingmenu.¡Press [MENU] in the setting/adjusting menu to return to the mainmenu mode.21q [}] and [{] buttons move thecursor vertically.w [[] and []] buttons move thecursor horizontally.e To set, press [ENTER].*Making selection and adjustment on the Menu.3Note: The menu RDS cannot be selected in themodes other than FMmode.Note: The submenu, “BAL/FAD” is not available when “P • MODE” is active.