Panasonic CS-A24BB4P Service Manual

Also see for CS-A24BB4P: Operating instructions Service manual

Contents

Panasonic CS-A24BB4P Service Manual Manual pdf 85 page image

23.1. Energy save setting•• Upper and lower limit can be set for the setting temperatureduring cooling and heating operation. (The factory shipmentsetting has an upper limit of 31°C and a lower limit of 16°C.)1. While operation is stopped, press the TEMP UP and TEMPDOWN buttons simultaneous ly.2. To set an upper limitPress the OPERATION button until HEAT is displayed.↓Press the TEMP UP or TEMP DOWN button to set thetemperature.↓Press the SET button to complete the upper limit setting.Example:If the heating display is set to 28°C, setting the temperatureto higher than 28°C will not be possible.* Upper and lower limits cannot be set at the same time.3. To set a lower limitPress the OPERATION button until COOL is displayed.↓Press the TEMP UP or TEMP DOWN button to set thetemperature.↓Press the SET button to complete the lower limit setting.Example:If the cooling display is set to 22°C, setting the temperatureto lower than 22°C will not be possible.* Press the CANCEL button to cancel the setting.23.2. Switching to the remotecontrol thermistor•• The temperature detection thermistor used for detecting theindoor temperature can be switched between the thermistorat the indoor unit and the thermistor at the remote controlunit. (The factory shipment setting is at the indoor unit side.)1. While operation is stopped, press and hold the TEST RUNbutton, TEMP UP button and TEMP DOWN buttonsimultaneous ly.Press the FORWARD or BACK timer button to change thetemperature detection setting.2. Press the SET button to complete the setting.To change the setting, repeat the above operation.23 SETTING OF SAVE ENERGY AND THERMISTOR SWITCH85CASSETTE TYPE