ENGLISH9Remote control preparations HOW TO INSERT THE BATTERIES1 Remove the back cover.2 Insert thebatteries andclose the backcover. Check whether the displayon the remote control isblinking.If there is no display, recheck andadjust the position of the batteries. Synchronize to the local time.Blinking2 units of AAAalkaline batteriesBack cover HOW TO SYNCHRONIES TO THE LOCAL TIME1 Press theclock button2 Use the up-down arrowbuttons toadjust thetime3 Press theclock buttonBlinkingBlinkingLighted[Notblinking] Fast advance by pressing the buttoncontinuously. At midnight 12.00 o’clock, the display willshow:(Example) 2.30 pm will be:Replacing the batteries REPLACEMENT PERIOD The standard replacement period is 1 year. Whenever there is weak signal reception or weak display on the remote control.PLEASE COMPLYAs the cause of breakdowns and injuries is normally dueto electrolyte leakage, heat up or breakages, pleasecomply with the following recommendations: Always replace both the alkaline batteries at the sametime. (Manganese batteries have shorter life spans) Avoid using rechargeable (Ni-Cd types) batteries. (Dueto differences in dimensions, shapes and operatingproperties) Remove both the batteries if the remote control is notto be used for a long period.NOTE You may replace the batteries before therecommended replacement due date. The supplied batteries are for your initialoperation use, hence you may need to replacethem earlier than the standard 1 year period.( )Insert from theside way.