Panasonic CX-400 Series Instructions Manual

Also see for CX-400 Series: User manual Instruction manual Manual Instruction manual User manual

Contents

6Thru-beam and retroreflective types12 SPECIFICATIONSItemThru-beam RetroreflectiveStandard Long sensing range Ultra long sensingrange With polarizing filter*1*1 The retroreflective type sensor with polarizing filters may not stably detect specular or glossy objects through transparent film since light is polarized by thetransparent film. For details, see page 5, section 8, RETROREFLECTIVE TYPE SENSOR WITH POLARIZING FILTERS.Long sensing rangeNPN output CX-411 *2*2Model nos. with the suffix -J indicate the M12 pigtailed type. The suffix -Z indicates the M8 connector type. Thru-beam model nos. with the suffix “E” shownon the label affixed to the sensor is the emitter; “D” is the receiver. The retroreflective type sensor model no. with the suffix “-Y” comes without the RF-230reflector.CX-412*2 CX-413*2 CX-491*2 CX-493*2PNP output CX-411-P *2 CX-412-P*2 CX-413-P*2 CX-491-P*2 CX-493-P*2Sensing range 10m 15m 30m 3m*3*3The sensing range and the sensing object for the retroreflective type sensor is specified for the RF-230 reflector. For more detailed information, please referto the CX-400 Series User’s Manual. After installation, be sure to check operation under actual conditions.5m*3Object to be sensed12mm or more opaque object 50mm or moreopaque, translucent orspecular object*350mm or moreopaque or translucentobject*3Repeatability(perpendicular to sensing axis)0.5mm or lessSupply voltage 12 to 24V DC ±10% Ripple P-P 10% or lessCurrent consumptionEmitter: 15mA or lessReceiver: 10mA orlessEmitter: 20mA or lessReceiver: 10mA orlessEmitter: 25mA or lessReceiver: 10mA orless13mA or less 10mA or lessOutputNPN or PNP output type• NPN or PNP open-collector transistor• NPN: Maximum sink current: 100mA; PNP: Maximum source current: 100mA• Applied voltage: 30V DC or less (NPN: between output and 0V; PNP: between output and +V)• Residual voltage:NPN: 2V or less (at 100mA sink current), 1V or less (at 16mA sink current)PNP: 2V or less (at 100mA source current), 1V or less (at 16mA source current)OutputoperationLight-ON or Dark-ONShort-circuitprotectionIncorporatedResponse time 1ms or less 2ms or less 1ms or lessAutomaticinterferenceprevention functionBy mounting interferenceprevention filters*4, twosets of the sensors canbe mounted closetogether.*4 For details, see page 5, section 10, INTERFERENCE PREVENTION FILTERS.— IncorporatedProtection IP67 (IEC)Ambient temperature -25 to +55°C (No dew condensation or icing allowed), Storage: -30 to +70°CAmbient humidity 35 to 85% RH, Storage: 35 to 85% RHEmitting element Red LED Infrared LED Red LEDMaterial Enclosure: PBT, Lens: Acrylic, Indicator cover: AcrylicCable 0.2mm 2 3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2m longWeight Net Emitter: approx. 45g ; Receiver: approx. 50g Approx. 50gGross Approx. 100g Approx. 80gAccessory *5*5The RF-230 reflector is included with the product. Other reflectors and reflective tape are available for purchase. For more detailed information, please referto the CX-400 Series User’s Manual.— RF-230 (Reflector): 1 pc.Ramco Nationalwww.PanasonicSensors.com1-800-280-6933

/ 9

Related manuals for Panasonic CX-400 Series