Panasonic DLP PT-D3500U Operating Instructions Manual

Also see for PT-D3500 - XGA DLP Projector: Setup and operation manual Specifications Spec file

Contents

Panasonic DLP PT-D3500U Operating Instructions Manual Manual pdf 13 page image

13LAN terminal (page 38)This terminal is used to control the projector fromthe PC. (10Base-T/100Base-TX compliant)DVI-D IN terminal (page 20)DVI-D signals are applied to this terminal. (24-pinDVI connector)RGB 2 input (RGB 2 IN) terminal (page 20)A terminal to input RGB or YPB PR signals (D-SUB15-pin female).RGB 1 input (RGB 1 IN) terminal (pages 19, 20)A terminal to input RGB or YPB PR signals (BNC).S-VIDEO input terminal (page 19)An input terminal for S-video signals(MIN4-pin DIN).This terminal complies with S1 signals andautomatically toggles between 16:9 and 4:3according to the size of input signals.VIDEO input terminal (page 19)An input terminal for video signals. (RCA)VIDEO audio input terminalAn audio input terminal for video input signals.(RCA)S-VIDEO audio input terminalAn audio input terminal for s-video input signals.(RCA)RGB2 audio input terminalAn audio input terminal for RGB2 input signals.(M3 stereo mini jack)RGB1 audio input terminalAn audio input terminal for RGB1 input signals.(M3 stereo mini jack)AUDIO OUT terminalAn audio output terminal for audio amplifier orother devices. (M3 stereo mini jack)DVI audio input terminalAn audio input terminal for DVI-D input signals.(M3 stereo mini jack)Serial input terminal (RS-232C) (pages 20, 39)Use the RS232C serial terminal as an alternativeinterface for controlling the projector from your PC(D-SUB 9-pin female).REMOTE2 IN terminal (page 41)The user can remotely control the main unit byusing an external control circuit to this terminal(D-SUB 9-pin female).REMOTE1 lN terminal (page 16)The main unit can be controlled with a wiredremote control cable (M3 stereo mini jack).Side-mountedconnection terminalsLAN terminal (10Base-T/100Base-TX)Connect LAN cable.LAN 10/100 lamp (Yellow)Lights up when 100Base-TXconnected.LAN LINK/ACT lamp (Green)Lights up when connected.Flashes when receiving/sendingsignals.