Panasonic DLP PT-D3500U Operating Instructions Manual

Also see for PT-D3500 - XGA DLP Projector: Setup and operation manual Specifications Spec file

Contents

Panasonic DLP PT-D3500U Operating Instructions Manual Manual pdf 34 page image

34OPTION1 settingsOPTION1COLOR CORRECTIONBACK COLOR BLACKSUB MEMORY LISTDVI EDID EDID2:PCOFFCONTRAST MODEAUTO SIGNALSELECT RETRNENTERCOLOR CORRECTIONOFF : Standard settingUSER : The six colors of red, green, blue, cyan,magenta and yellow can be adjustedand registered for each of four signalsystems: Video, S-Video, RGB andYP B PR .Press the “ENTER” button to make thedetailed settings.SELECTRETRNSTORESUB MEMORY LISTCONTRAST MODEThere are two modes for adjusting to the operatingenvironment.NORMAL : The contrast is set to normal and thebrightness to maximum.HIGH : The contrast is set to maximum andthe brightness to normal.AUTO SIGNALThe position where the screen is displayed can beadjusted automatically without pressing the AUTOSETUP button on the remote control each timesignals are input when signals are input frequentlysuch as when the projector is used at a conference.ON : Auto setup is performed automaticallywhen the video signals of the imagesbeing projected have changed.OFF : The input auto setup function is set toOFF.BACK COLORYou can set the colors of the screen when no signalis input to the projector.BLUE: Set screen color to blue.BLACK: Set screen color to black.DVI EDIDSet EDID to match the device connected.SUB MEMORY LISTMultiple sets of image adjustment data (PICTURE,POSITION, ADVANCED MENU adjustment values)for the same kind of signal can be registered.Registering in sub memorySelect the sub memory number to be registeredusing the button.Press the ENTER button.How to select sub memorySelect sub memory number (1 to 8) using thebuttons. Select “–” if you do not wish touse the sub memory.Press the ENTER button.How to erase sub memorySelect sub memory number (1 to 8) correspondingto sub memory to be erased using buttons.Press the STD button.When the indicator of sub memory to be erasedflashes, press the ENTER button.• Sub memories range from 1 to 8.Note• You cannot select sub memory of adifferent signal system.NoteCOLOR CORRECTIONRGBR 00000G 0CyBMgYeSELECT ADJ RETRNThe current signalsystem is displayed.ModeEDID1EDID2:PCMatching Signal480p, 576p, 720/60p, 1080/60i,1080/50iVGA480/60, SVGA/60, XGA/60,XGA/70, XGA/85, SXGA/60