Panasonic DLP PT-D3500U Operating Instructions Manual

Also see for PT-D3500 - XGA DLP Projector: Setup and operation manual Specifications Spec file

Contents

Panasonic DLP PT-D3500U Operating Instructions Manual Manual pdf 41 page image

Using the REMOTE 2 terminal41Using the REMOTE 2 terminal provided on the side of the main unit, it is possible to operate the projector from acontrol panel etc. furnished in a distant location where infrared remote control signal cannot be received.Pin assignments and controlBe sure to short-circuit Pins and when controlling.D-Sub 9-pin (female)external appearance• The following buttons on the remote control and the operation area of the projector can no longerbe operated when pins and are shorted: POWER button and SHUTTER button.Neither will it be possible to use the RS232C commands or network functions corresponding tothese functions.• If you short pin and pin , and also short one of the pins from to and pin , then thefollowing buttons on the projector operating area and the remote control can no longer beoperated: POWER button, RGB button (RGB1, RGB2 and DVI buttons in case of remote control),VIDEO button (VIDEO and S-VIDEO buttons in case of remote control) and SHUTTER button.Neither will it be possible to use the RS232C commands or network functions corresponding tothese functions.Note DVIExample of a control panel layoutProjector set up in a meeting roomControl panel located in a different roomSTANDBY ONLAMPRemote terminal External controlRemote terminal/External controlRGB1 VIDEORGB2 S-VIDEONames of terminalsGNDPOWERRGB1RGB2VIDEOS-VIDEODVISHUTTERRST / SETOpen (H)Controlled by remote controlOFFOtherOFFShort (L)Controlled by external contactONDVIS-VIDEOVIDEORGB2RGB1ONGNDOtherOtherOtherOther