Panasonic DLP PT-D3500U Operating Instructions Manual

Also see for PT-D3500 - XGA DLP Projector: Setup and operation manual Specifications Spec file

Contents

Panasonic DLP PT-D3500U Operating Instructions Manual Manual pdf 58 page image

58Specifications1 Value when accessory lens is used, “PICTURE MODE” is set at “DYNAMIC” and zoom lens is in the wide lensposition.2 HDCP (High-bandwidth Digital Content Protection)HDCP is a digital video signal encryption system developed with the aim of protecting digital content.Power supply AC 120 V, 50 Hz/60 HzPower consumption 400 W (about 10 W in standby without fan running)DLPTM panelPanel sizeDisplay systemNumber of pixels0.7 inch (aspect ratio 4:3)DMDTM element, DLP type786 432 pixels (1 024 x 768 dots)LensPowered zoomPowered focus control1 to 1.32F=1.7 to 2.0 f=25.6 mm (1") to 33.8 mm (1.3")Projection lamp 1 bulb x 300 W UHM lampOptical output 3 500 lm 1Applicable scanning frequencyFor video signal (S-video included)For RGB signalFor DVI-D signalFor YP BPR signalHorizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 HzHorizontally 15 kHz–91 kHz, vertically 50 Hz–85 Hz,Panasonic Intelligent Auto Scanning (PIAS) systemDot clock frequency Less than 108 MHzCompliant with HDCP 2EDID1: 480p, 576p, 720/60p, 1080/60i, 1080/50iEDID2: VGA480/60, SVGA/60, XGA/60, XGA/70, XGA/85, SXGA/60[480i], horizontally 15.73 kHz, vertically 59.94 Hz[480p], horizontally 31.5 kHz, vertically 59.94 Hz[576i], horizontally 15.63 kHz, vertically 50 Hz[576p], horizontally 31.25 kHz, vertically 50 Hz[720/60p], horizontally 45 kHz, vertically 60 Hz[1035/60i], horizontally 33.75 kHz, vertically 60 Hz[1080/60i], horizontally 33.75 kHz, vertically 60 Hz[1080/50i], horizontally 28.13 kHz, vertically 50 Hz• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.Contrast ratio 1 600:1 (when “HIGH” is selected as the “CONTRAST MODE” setting)Color system 7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60)Screen size 50 inch–600 inchScreen aspect ratio 4:3Projection scheme Menu-selectable from front/rear/ceiling mount, and floor standingInterface portsRGB1 input terminal 1 set, BNC x 5[For YP B PR input]Y: 1.0 V[p-p] synchronization signal included, PB PR: 0.7 V[p-p] 75 Ω[For RGB input] 0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V[p-p] 75 ΩHD/SYNC: TTL, high-impedance, positive/negative polarityautomatically adjustedVD: TTL, high-impedance, positive/negative polarity automaticallyadjusted• However, HD/SYNC, and VD terminals are not compliant with 3-valuedirect SYNC.