- 204 -Wi-Fi1 Press [Wi-Fi].2 Press 3/4/2/1 to select [New Connection], andthen press [MENU/SET].• When connecting with the setting you used before, you can select the connection destinationfrom [History Connection] (P179) or [Favorite Connection] (P180).3 Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/SET].4 Press 3/4 to select [AV device], and then press [MENU/SET].5 Press 3/4 to select [Home] or [External], and then press [MENU/SET].6 Press 3/4 to select connection method, and then press [MENU/SET].7 Press 3/4 to select a device you want to connect, and then press [MENU/SET].• When the connection is complete, the screen is displayed. To change the send setting, press[DISP.]. (P192)8 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].• To change the setting or disconnect, press [Wi-Fi]. (P189)9 Select and send the images. (P200)When sending images to AV devicePreparations:When sending a picture to [Home], set your device to DLNA waiting mode.• Read the operating instructions of your device for details.When sending images to [External], the following are required:• Registration to “LUMIX CLUB” (P206)• Address number and access number acquired by the destination External AV device. (P210)[Via Network] When you want to connect to an AV device via a wireless access point.(P185)[Direct]• This can beselected onlywhen [Home]is selected.When you want to directly connect an AV device to this unit with [Wi-FiDirect], [WPS Connection], or [Manual Connection]. (P187)
