- 211 -Wi-FiHow to Use the [Wi-Fi Setup] MenuFor details on how to select the [Wi-Fi] menu settings, refer to P48.Configure the settings required for the Wi-Fi function.[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)2 Press 3/4 to select item, and press [MENU/SET].• Refer to P206 for details.• For details on how to enter characters, refer to “ Entering Text” section on P94.• If you are using the PC with standard settings, you do not need to change the workgroup.• Refer to “ Entering Text ” (P94) for information on how to enter text.• Up to 32 characters can be entered for [A], [a], [1], and [&].• Refer to P210 for details.• It is initially set to [ON] on the camera.[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID.[PC Connection]You can set the workgroup.To send images to a PC, a connection to the same workgroup as thedestination PC is required.(The default setting is “WORKGROUP”.)[Change Workgroup Name]:Enter the workgroup of the connecting PC.Close the menu after changing settings.[Restore to Default]:Restores the default state.Confirmation screen is displayed. It is executed when [Yes] is selected.Exit the menu after it is executed.[Device Name]You can change the name of this unit.1 Press [DISP.].2 Enter the desired device name.[External AV device] Images can be sent to the AV device of relatives and acquaintancesvia “LUMIX CLUB”.[NFC Operation]Configures the settings for the NFC function.[ON]:NFC function is worked.[OFF]