- 222 -Connecting to other equipment∫ Transferring pictures to a PC1 Connect the computer and camera with the USB connection cable(supplied).2 Press 3/4 to select [PC], and then press [MENU/SET].• If [USB Mode] (P59) is set to [PC] in the [Setup] menu in advance, the camera will beautomatically connected to the PC without displaying the [USB Mode] selection screen.• When the camera is connected to a PC while [USB Mode] is set to [PictBridge(PTP)], amessage may appear on the PC screen. In that case, close the message, and remove theUSB connection cable safely (P224), and then set the [USB Mode] to [PC].• When [USB Mode] (P59) in [Setup] menu is set to [GPS assist data], the folder wherepictures are saved will not be displayed. Set [USB Mode] to [PC].3 Copy the images to a PC using “PHOTOfunSTUDIO”.• Do not delete or move copied files or folders in Windows Explorer. When viewing in“PHOTOfunSTUDIO”, you will not be able to play back or edit.• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining batterypower becomes low while the camera and the PC are communicating, the alarm beeps.Refer to “ Disconnecting the USB connection cable safely ” (P224) before disconnecting the USBconnection cable. Otherwise, data may be destroyed.• Before connecting or disconnecting the AC adaptor (optional), turn the camera off.• Before inserting or removing a card/battery, turn the camera off and disconnect the USB connectioncable. Otherwise, data may be destroyed.Preparations: Install “PHOTOfunSTUDIO” to the PC.• Check the directions of the connectors, and plug them straight in or unplug them straightout. (Otherwise the connectors may bend out of shape which will cause a malfunction.) Donot connect devices to incorrect terminals. Doing so may cause malfunction.• Do not use any other USB connection cables except the supplied one or a genuinePanasonic USB connection cable (DMW-USBC1: optional).A USB connection cable (supplied)B Align the marks, and insert.
