- 266 -Others• When the brightness changes due to zoom or camera movement etc., the lens may click and thepicture on the screen may drastically change. However, the picture is not affected. The sound iscaused by the automatic adjustment of the aperture. This is not a malfunction.• If you do not use the camera for a long time, the clock may be reset.> [Please set the clock] message will be displayed; please reset the clock. (P28)• When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not amalfunction.• Is the camera set to Macro Zoom Mode? (P69)Maximum zoom during Macro Zoom Mode is 3k digital zoom.• When you perform an operation after taking a certain action, the pictures may be recorded in folderswith different numbers from the ones used prior to the operation.• If you insert or remove the battery before turning off this unit, the folder and file numbers for thepictures taken will not be stored in the memory. When this unit is turned on again and pictures aretaken, they may be stored under file numbers which should have been assigned to previouspictures.• Formatting is not available in Intelligent Auto Mode. Switch the recording mode to another one.(P31)• When [GPS Setting] is set to [OFF], magnetic declination is not corrected.> Perform [Repositioning] of [GPS/Sensor] menu (P125), and acquire correct latitude/longitude ofthe current location.The lens clicks.The clock is reset.Zooming stops instantaneously.Zoom does not go up to maximum magnification.The file numbers are not recorded consecutively.The file numbers are recorded in ascending order.The card cannot be formatted.Bearing information measured with this unit is different from the public bearingindications.
