Panasonic DMR-BST835 Operating Instructions Manual

Contents

TroubleshootingVQT4W69 107The remote control does not work.• The remote control and main unit are usingdifferent codes. Change the code on the remotecontrol.• Software (firmware) is updating when “UPD/” is displaying on the unit’s display. Wait untilthe update is completed. (> 101)• The HOLD function is activated. (> 105)• Startup of this unit may be slower depending onthe TV settings.“0:00” is flashing on the unit’s display.• Set the clock. (> 84, 99)The clock does not display on the unit whenswitched to standby.• The clock does not display when “Unit’s Display”is set to “Automatic”. (> 93)Screen size is wrong.• Check the “TV Aspect” or “Aspect for 4:3 Video”.(> 94)• Adjust the aspect ratio setting on TV.• If you connect to 4:3 TV, set “HDMI VideoFormat” to “576p/480p”. (> 84, 94)• Check “Aspect for Recording” before recordingor file conversion. (> 84, 90)The black screen appears on the TV.• This phenomenon may occur, depending on theTV setting, when “Quick Start” is activated.Depending on the TV, this phenomenon may beprevented by reconnecting to a different HDMIinput terminal.Picture does not appear with the HD qualityalthough HD setting was made.• The pictures are output with 576p/480pdepending on the title.The screen changes automatically.• If “Screen Saver” is set to “On”, the screen saverfunction will be activated when there is nooperation for 5 minutes or more. (> 93)There is a lot of image lag when playing video.• Set to “0” all items in the “HD optimizer”. (> 83)• Set “Audio Delay”. (> 84, 93)Unit's displayPress and hold [OK] andthe indicated numberbutton at the same timefor more than 5 seconds.(> 99)Startup is slow.• Startup takes time in the following situations:- A disc is inserted.- The clock is not set.- Immediately after a power failure or the ACmains lead is connected.- When a BD-J application is executing.- When the “Quick Start” is not activated. (> 98)DisplaysTV screen and video