Panasonic DMR-BST835 Operating Instructions Manual

Contents

Convenient functionsVQT4W69 99Automatic Standby after Copy• On:This unit is turned to standby mode when itis not operated for approximately 5 minutesafter completing copy (> 57, Copying frommedia other than HDD with DIRECTNAVIGATOR, Copying titles with copyinglist).Power Save for Network StandbyYou can minimize power consumption instandby mode even when the “Quick Start”function is activated. (> 117)• When this is set to “On”, startup time when operating[GUIDE] and [DIRECT NAVIGATOR] from standbymode will be longer.Remote ControlChange the remote control code on the main unitand the remote control if you place otherPanasonic products close together.• Use “BD 1”, the factory set code, under normalcircumstances.1 Select the code, then press [OK].2 While pressing [OK], press and hold thenumber button ([1] to [6]) for more than5 seconds.3 Press and hold [OK] for more than 5 seconds.4 Press [OK].ClockIf the time is not set correctly, use the settingslisted in the method below.• AutomaticThis unit usually obtains time and dateinformation from digital broadcasts.• Time ZoneWhen the time is not correct, set “Time Zone”.(GMT - 6 to + 6)• Manual Setting1 Select “Off” of “Automatic”, then press [OK].2 Select the item you want to change.3 Change the setting.4 Press [OK] when you have finished thesettings.• When the clock is set manually, you cannot performplaying/recording/PAUSE LIVE TV/REWIND LIVE TV ofthe programmes that are copy protected (Retentionlimit). (> 15)PIN EntryYou can set/change the PIN for parental control.1 Enter your 4-digit PIN with the numberbuttons.2 Enter the new 4-digit PIN with the numberbuttons.• Make a note of PIN in case you forget it.e.g.,3 Press [OK].OKRemember the PIN.PIN Entry0 0 0 0