RecordingSQT0826 29Timer recordingRefer to “Using TV Guide system”. (> 24)Refer to “Operation during Recording”. (> 28)Refer to “To confirm and edit a timer programme”.(> 33)Select “Single Timer Rec.” or “Series Timer Rec.”(> 30), then press [OK].• You can enter up to 32 programmes within amonth in advance. (Each daily, weekly orseries programme is counted as oneprogramme.)• This operation only records to built-in HDD.• This unit can record two programmes beingbroadcasted at the same time.PreparationIf you want to change the recording mode:Press [REC MODE] and select the recordingmode, then press [OK].1 Press [GUIDE].TV Guide screen appears.2 Select the programme, then press thered button.The timer icon “F” (red) is displayed.• If on-screen instructions are displayed,follow them.• Some broadcasters may not send programme information.When programme information is not displayed correctly,use manual timer recording. (> 31)• The receipt of the TV Guide data via Set Top Box is notpossible.• When timer recording from the external equipment, usemanual timer recording. (> 31)• You can set the start and finish time to make the timerrecording work successfully. (> 70, 74, Timer Record StartBuffer, Timer Record Stop Buffer)To use TV Guide systemOperation during RecordingTo edit the timer programmeIf the screen for selecting single or seriestimer recording appearsTo edit the timer recording on the TV Guidescreen1 Select the programme to edit, then press thered button.2 Select “Timer Rec Edit”, then press [OK].3 Go to step 3 on page 31, “Manuallyprogramming timer recording”.To cancel a timer recording on the TV Guidescreen1 Select the programme to cancel, then pressthe red button.2 Select “Timer Rec Cancel”, then press [OK].(“F” disappears.)